Grateful We Are Friends – Sparkle N Sprinkle November Release

Hello friends!  Stopping in today to share my  Guest Design card from the Sparkle N Sprinkle November release using the Koi Pond Friends rubber stamp set [00-919P5] along with several other really fun products from Sparkle N Sprinkle!  Please be sure to check out the entire November release in the store!  I really had so much fun creating with these new sets and awesome products!

Vicki-SnSNov-KoiPondFriends

I started out with a piece of watercolor paper and sprinkled three different colors of Nuvo Shimmer Powders on it:  Atlantis Burst [1213N], Green Parade [1214N] and Blue Blitz [1208N].  I sprinkled all the colors at once before applying any water to it.  I sprinkled VERY little and just added a bit more here and there as I spritzed it with water.  I saturated the paper and moved it around until it was covered how I wanted it to look.  I dabbed it up with a paper towel and used a heat gun to dry it up a bit.  I just love the beautiful shimmer on this background!

Vicki-SnSNov-KoiPondFriends2

Also for the background, I took the bubbles image from the same stamp set and stamped them in VersaMark ink [VM001] around the right corner and bottom over the watercolor piece.  I heat embossed the bubbles with some Sparkle N Sprinkle Frosted Juniper [EP406] and Sparkle (Semi-transparent) [EP107] embossing powders.  I then mounted this watercolor background panel onto the top edge of a black A2 Sized top folding card base.

With the close-up view of the fish, I heat embossed them with the SnS Copper Embossing Powder [EP236] over some Bristol paper.  For the flower image, I just stamped it with black waterproof ink in the same Bristol paper.  Below I will share how I went about coloring both the fish and the flower:

Vicki-SnS-GratefulFriends-coloring

After heat embossing the fish and stamping the flower, I took the Nuvo Glitter Markers in the following colors:  Mighnight Shadows [172N], Ember Glow [170N] and Urban Graphite [188N] and pressed the pens down onto my Tim Holtz Glas s Media Mat [1914E] to get a “pool” of it and then used my Waterbrush to blend and color the images. It leaves a beautiful shimmer and blends the colors together so nicely!

Vicki-SnSNov-KoiPondFriends3

Here’s a closer view of the colored flower with the shimmer.  I fussy cut all the colored images and glued them on the card base with some SnS dimensional glue.  For the flower image, I decided to off-set it and trim off the edges with scissors.

For the greeting, using the same rubber stamp set, I stamped it with a black pigment ink and then sprinkled it with some SnS Sparkle (semi-transparent) [EP107] and heat embossed it to give it a nice sparkly look!

Vicki-SnSNov-KoiPondFriends1

For the bottom portion of my card, I cut out a strip of cardstock the width that I wanted to go across the bottom and underneath the watercolor panel.  I covered the entire strip with some  SnS Dimensional Glue and then covered that up with these stunning Bronze Mica Flakes [MF05] and let it dry.  After it was dried, I pressed and burnished them into the strip with my finger and bone folder.  The extra pieces will come off the sides as you rub it around or you could also trim it off if you prefer, but I found it to not be necessary.  You can see how big the flakes are in the photo as I scattered a few of them around my card in the photos.  This was by far my favorite thing to play with on my card! 🙂

I hope you’ve enjoyed my creation today and I thank you so much for stopping in!  Please be sure to visit the Sparkle N Sprinkle Blog and don’t forget to play along in the monthly challenges at the Sparkle N Sprinkle Creative Challenge Blog as well as the Sparkle N Sprinkle Facebook Creative Challenge Group too!  Looking forward to seeing your creations there!

Also don’t forget to use my discount code when you go shopping at Sparkle N Sprinkle!  Click on the badge below to start shopping for your sparkly goodies!

SnS discount code badge

Here’s the Full Sparkle N Sprinkle product list for my card today:

  1.  Koi Pond Friends rubber stamp set [00-919P5]  *New November Release – Also offered as a digital set [DIGI919BC] plus check out the super digital bundle where you get more! – or you can check out the rubber stamp bundle too and save more money!
  2. Bronze Mica Flakes [MF05]
  3. Copper Embossing Powder [EP236]
  4. Sparkle Embossing Powder [EP107]
  5. Frosted Juniper Embossing Powder [EP406]
  6. Dimensional Glue
  7. Sparkle N Sprinkle Static Free Bag [99512]
  8. Glitter Brush [SG1400]
  9. Nuvo Glitter Marker set Midnight Shadows [172N]
  10. Nuvo Glitter Marker set Ember Glow [170N]
  11. Nuvo Glitter Marker Urban Graphite [188N]
  12. Waterbrush – LG
  13. Nuvo Shimmer Powder Atlantis Burst [1213N]
  14. Nuvo Shimmer Powder Green Parade [1214N]
  15. Nuvo Shimmer Powder Blue Blitz [1208N]
  16. Tim Holtz Glass Media Mat [1914E]

Merry & Bright Kitty

Hello friends!  Hope you’re having a great weekend so far!  I’m back to share another Sparkle N Sprinkle creation that I’ve made using the adorable Christmas Kitty Digital Stamp Set [DIGI921CS] from the October Release:

Vicki-SnS-ChristmasKitty-OctGDT

I wanted this kitty to be the main focus of my card along with the lights and I wanted them to pop out on my design.  I also wanted to add my panel complete with the “extra” light string and greeting.  So I opened up a blank Word doc. to add my images.  I sized and arranged the kitty where I wanted him, then next to him I’ve added the additional “extra” lights and then positioned my greeting from the set where I wanted it, printed it out and colored in the lights and kitty with Copic markers.  To make the lights appear as one continuous string of lights, I took an alcohol friendly fine line marker to draw a line to the existing lights on the kitty.  I just love the look on his face as he was so much fun to color! 🙂

Vicki-SnS-ChristmasKitty-OctGDT1

To get the glowing look on the lights, I added some color around each light with the same color of chalk.  Then I took the Diamond Dust Glitter and added it over the light bulbs with the Nuvo Smooth Precision Glue pen.

I then cut this panel out with a rectangle cross stitch die cut from my stash.  After it was cut, I took some blue colored ink and stamped the pine cone image from the Holiday Greetings Rubber stamp set  to frame in the kitty panel.

I decided to cut out some pine leaves with the same light blue card stock with a die cut from my stash and then I covered them with VersaMark ink and heat embossed them with the Vanilla Ice embossing powder.  You will also notice a bit of sparkle around the kitty panel edge too.  I took the panel and pressed the edges into the VersaMark ink pad and then heat embossed the edges with the Sparkle embossing powder.

Vicki-SnS-ChristmasKitty-OctGDT2

Here you can see the design on my light blue card front as well.  This is where I took the same pine cone rubber stamp image and stamped randomly along the edges of the card front and heat embossed it with the Vanilla Ice embossing powder.  The heat embossed pine cone leaves were attached to the edge of the kitty panel along with a sparkly ribbon bow and a snowflake accent.  I layered a piece of black cardstock around the image panel and popped it up with some craft foam and mounted that over the front of the heat embossed light blue card front which was wrapped with some more of the sparkly ribbon.  This was mounted over an A2 sized top folding white card base.

I hope you’ve enjoyed my sparkly cute card today!  Please be sure to use the code below and click on the badge to shop and receive your 10% discount:

SnS discount code badge

Be Sure to check out the Sparkle N Sprinkle blog tomorrow for special sneak peeks on what is coming for the new release!!  Yay!  Stay tuned!

Sparkle N Sprinkle Product Supply List used:

Sparkle N Sprinkle Christmas Kitty (digital set) [DIGI921CS]

Sparkle N Sprinkle Holiday Greetings (rubber stamp set) [00-689P7]

Sparkle N Sprinkle Embossing Powder Sparkle (semi-trans) [EP107]

Sparkle N Sprinkle Embossing Powder Vanillia Ice (fine detail-opaque) [EP265]

Sparkle N Sprinkle Ultrafine Glitter Diamond Dust (semi-trans) [G1116]

Sparkle N Sprinkle dimensional glue 

Sparkle N Sprinkle Static Free Bag [99512]

Glitter Brush [SG1400]

Nuvo Glue Pen Smooth Precision [206N]

VersaMark Embossing ink pad [VM001]


 

Challenges I’d like to enter:

  1.  Crazy 4 Challenges (C4C458) – Card with Cat or Halloween themed
  2. Crafting By Designs – Get Ready for Christmas
  3. 4 Crafty Chicks (4CC427) – Christmas
  4. Craft Rocket – Christmas is Coming
  5. Crafting With an Attitude – Anything Goes

Exciting Guest Design News to Share! (Last Post of 3 today)

Hello friends! Sorry to be throwing so many posts out to you at once, but as you can see there are so many exciting things going on the first of the month and I’m happy to be sharing it with you!

_design team badge

I’m excited to finally announe that I’ve been asked to be a guest designer with the folks over at Sparkle N Sprinkle for the next 3 months!!  How cool is that?!  I absolutely LOVE to do a little sparkling and sprinkling so this fits right in with my creating! 🙂  I hope you will enjoy seeing my creations with these products!

I also will be posting my creations on the Sparkle N Sprinkle Blog too…so be sure to check out all Sparkle N Sprinkle inspiration from the design team over there as well!  (We will be showing creations made with the new release each month!!)   I’m starting out my first creation using some of the latest digital images released at the beginning of October.

I have come up with an easel card design that I’ve created using the digital set called Memory In Our Hearts:

Vicki-SnS-MemoryinOurHearts-OctGDT

 

The great advantage to using a digital set is that they come with pre-colored images as well as outlined images to create many different looks you’re wanting.  In addition to that, you can also manipulate the size and structure of your image as I have done with my card here.  (This is a great way to come up with a unique design too!)

I have taken some of the pre-colored “sprigs” in the fall theme color and sized and moved them around in a Word doc. to create my own Fall wreath with it!  I then added the beautiful sentiment to the center and placed where I wanted it and then printed it out along with a couple more sprigs that you see on the inside of this design.

Vicki-SnS-MemoryinOurHearts-OctGDT1

To step things up a notch, I’ve used a protractor to draw a circle around my wreath image as well as a larger circle for a mat behind it and fussy cut them out. (I didn’t have a circle die large enough to accomodate my wreath image.)  I took my ink blending tool and some Tea Dye and Vintage Photo distress inks to add some color around the edges.  Since I made a Fall wreath design, I wanted to add some glitter to the leaves.  So I took the Nuvo Precision glue pen and added some Waterscape glitter over them.  For the “berries”, I took some Ripened Pumpkin Nuvo Crystal Drops in random areas around the leaves.  I made a bow with some natural twine and added it to the top of the wreath.  (I did this same process for the smaller “sprigs” on the inside of the card as well.)

Vicki-SnS-MemoryinOurHearts-OctGDT2

 

For my card design, I have made an “easel style” card (more on that below).  My card size is a 5 1/2″ square.  I have used the same cardstock color that I’ve used to print out my wreath image and separated it in two panels to fit on the front of my card base.  I took an embossing folder from my stash to add some texture to my design and also used the distress inks again to add some color around the edges.  I used the Sparkle N Sprinkle dimensional glue to add some “dots” in the corners and then sprinkled some “Autumn Medley” glitter over them and let it dry.  I have also taken some 1/4″ Tear-iffic Tape to the middle edges of the card base and burnished some of this same “Autumn Medley” glitter to that.  I think it really brings in that pretty Fall color theme with some added sparkle!

Vicki-SnS-MemoryinOurHearts-OctGDT3

 

And for the inside of my card, you can see that those extra “sprigs” that I’ve printed and cut out create an easel style “stopper/display” funtion for my card design.  It’s easy to create this look with a score mark made in the center of the card front base as you can see with the circle wreath shown fully.  (I know that Demo Donna has created a tutorial from one of the past video card kits if you want to learn more – check it out HERE and subscribe to their channel…you’ll love it!)

I have used some of the same colored cardstock as the printed out wreath for the inside of my card with some more distress inks along the edges as well as another strip of 1/4″ Tear-iffic Tape along the bottom edge burnished with some more of that “Autumn Medley” glitter.  I’ve used some foam tape to pop up the “sprig” cut out images so that they create the “stopper” for the front card base to rest while being displayed.

I hope that you’ve enjoyed my interactive card today and I look forward to sharing many more projects with you during my guest design spot for Sparkle N Sprinkle!

And what I thought was really awesome, is that Sparkle N Sprinkle has also given me a special code for my followers to use and receive a special 10% off your purchases! (Please note the code, click on the badge to shop and enter the code at check out!):

SnS discount code badge

(I will also have this badge with the link on the sidebar of my blog so that you can find it any time! ENJOY SHOPPING!)

Sparkle N Sprinkle Supply List for products used on my card today:

Sparkle N Sprinkle Memory In Our Hearts Digital Set [DIGI917DE]

Sparkle N Sprinkle 1/4″ Tear-iffic Tape [SAT01]

Sparkle N Sprinkle Ultrafine Glitter Waterscape (Semi-transparent) [G1108]

Sparkle N Sprinkle Ultrafine Glitter Autumn Medley (opaque) [G1013]

Sparkle N Sprinkle dimensional glue

Glitter Brush [SG1400]

Nuvo Glue Pen Smooth Precision [206N]

Nuvo Crystal Drops Ripened Pumpkin [665N]

Thanks so much for stopping in today my friends!  Please be sure to check out my earlier posts from today!  See you soon!

challenges:

  1.  {Cupcake Inspirations} CIC457 – FallCIC457 Bugaboo
  2. Try It On Tuesday – Thankful

A Beary Sweet Christmas Tag for 2 Crafty Critter Crazies (2nd Post of 3 today)

Hello friends!  I’m back with another new challenge for you today!

It’s the first of the month, so that means it’s time for a new monthly challenge over at 2 Crafty Critter Crazies!  As always the challenge will last for 1 whole month and all you need to remember is to add a critter to your creation!  We look forward to seeing your critter makes this month!

Our sponsor for the challenge this month is Sparkle N Sprinkle!  They were kind enough to supply our team with some darling images to use for our creations!  Here’s what I’ve decided to make for my design:

Vicki-2CCC-SnS-tag

I have used this darling digital stamp set called A Peppermint Christmas  [DIGI3148M] from Sparkle N Sprinkle.  They offer colored versions with this digital set, but I opted to use this  cute polar bear and place the frame around him along with adding the sentiment above his head so I could color it.  I used a Word doc. to design it before printing it out.  Once printed out, I cut it down to size for my black tag and rounded the corners with a corner chomper.

I’ve been trying to develop my skills a bit with colored pencils and invested in a large set of them recently.  So this is what I have used to color in the images of my tag.  After coloring it all in, I thought…. I couldn’t use a Sparkle N Sprinkle image with no sparkle!! So I took out my Quicky Glue Pen [quicky] and then sprinkled some SnS Waterscape Glitter (Semi-Transparent) [G1108] over the snowflakes and dark gold star bursts.  For the stars, I’ve sprinkled the SnS Lemonade Ultrafine Glitter (Semi-Transparent) [G1091] over it for a bit more brighter sparkle!  I’ve also covered the peppermint candies with the Nuvo Aqua Shimmer Glitter Gloss Pen [888N] for some shimmer.  AND…if that wasn’t enough, I took the Quickly Glue Pen again and went along the edges of the white image panel and added the Waterscape Glitter to the edges.

For the assembly of my tag, I’ve used a pre-made tag from Graphic 45 and sponged around the edges of it with white ink.  I took some green colored glitter paper from my stash and added a strip of it across the center of the black tag.  I then added some pink silk ribbon strips on each side of the glitter paper.  I then used some craft foam to pop up the image panel and placed it on the tag.

I finished it off with a pink silk ribbon bow and added some more of it to the tag hole for a hanging element and tied that together with a piece of white twine.  Decided for a finishing touch to add a sparkly snowflake gem in the center of the bow.

I hope that you have enjoyed my critter project and be sure to check out the rest of the inspiration from the design team over at the 2 Crafty Critter Crazies Challenge Blog and come and join in the fun with us!

I have some REALLY exciting news coming up shortly after this post!!!  TEE HEE!!

Thanks for hanging in there with me!

Challenges:

  1. QKR Stampede – Anything Goes (319)
  2. Sunny Day Crafting – Animal
  3. The Holly and Ivy Christmas Challenge – Anything Christmas Goes
  4. The Merry Christmas Challenge – Anything Christmas Goes

Witches Fly In a Glowing Moon

Hello friends!  With Fall on the way, I was really in the mood to create some spooky fun Halloween cards! (Plus I’m trying to get ready to fill my card rack for an up-coming craft booth and I ran low on Halloween cards from last year!)  I’ve also just received my winnings from playing in the Sparkle N Sprinkle challenge on Facebook, so I thought I’d use some products to enter again! 🙂

Vicki-SnS Black Magic-Glowing Moon

I thought I’d go for two cards here with the same products, but used in a slightly different way with the colored backgrounds and orientation.

I’ve picked out this cute Cackle On stamp set and the Wicked Web die cut for my winnings that I’ve used on both cards.  As you can see from the props in the photo above, I have also used the Sparkle n Sprinkle Black Magic embossing powder to heat emboss the witch image on both of them.  I just love the sparkle effect that stuff has!  I’ve also die cut the webs in black cardstock and then went over them with clear embossing powder.

Below I will share details about each one:

Vicki-SnS-BigGirls-sky

To get the moon, I die cut a circle from masking paper and used the negitive from the circle cut and placed it over my card front where I wanted the moon to be.  I inked the open circle area with VersaMark and then sprinkled some Glow-in-theDark embossing powder over it and heat set it.  For my background, I have used some Ranger Mixed Media card stock because of all of the embossing and inking that I’ve done.  I didn’t have to, but I put the circle cut from masking paper back over the moon.  (The embossing would resist the ink, but I did’nt want to take a chance and covered it anyway…although it didn’t stick very well! LOL!)  I then used my ink foam blending tool and added some distress oxide inks to create the background sky.  I even used purple over the orange color which is something you normally wouldn’t do, but with the oxide inks…it turns out stunning!

I then added some Nuvo Black Mousse with a sponge dauber along the edges which doesn’t show in the photo very well, but it has a cool shimmer.  Then this is where I’ve added the witch over the moon by inking it up with some pigment black ink and then heat embossed the Black Magic EP on it.  (I used my stamp positioner so that I could ink it several times as it was getting inked over the embossed moon.)  I’ve also inked up the sentiment in the same way except that I used some clear EP over it.

At the bottom, I cut a strip of ground with a grass edge border die and then used some Nuvo Copper mousse to sponge some color on top to make it look like the moon is shinning over it.  I mounted card front panel over a top folding black A2 sized card base.  Then lastly, I added some black sequins and filled the centers with Nuvo Silver Glitter Drops and then a smaller dot with some Nuvo Black enamel Drops.

Vicki-SnS-Lifesawitch-sky

This card pretty much was made in the same manner as the above card with the exception of the Distress Oxide colors I’ve used for sponging.  I also took my spray bottle and added some water dropplets and then dabbed it off with a paper towel.

I cut out this panel with a  MFT Wonky Stitch Rectangle die before attaching it to a black card base.

Then I wanted to show how cool this embossing powder is when the lights are off:

Vici-SnS-glowingMoon

I tried to get it as dark as I could so that you could see how that embossing powder really glows in the dark!!  To get a really fabulous glow, it’s best to do a couple of layers of embossing over it.

Hope you are having a great weekend and thanks so much for stopping by today!

Challenges:

  1.  Sparkle N Sprinkle – Anything Goes + use loose glitter/embossing powder/flocking
  2. Sparkle N Sprinkle Facebook challenge – Anything Goes + use SnS image
  3. {CupCake Inspirations} CIC453 – Spectacular BackgroundsCIC453
  4. Crafting With an Attitude – Anything Goes
  5. Crafty Friends – Embossing (wet or dry)

 

 

Follow Your Dreams and More Christmas Fair Project Entries

Hello friends!  I have usually posted on Fridays to share some updates on my crafty projects and such, but had some other things to take care of and hubby has been working different hours here and there, so I thought I’d pop on here for Saturday instead!

I made a card for the Sparkle N Sprinkle FB Group yesterday, but thought I’d share it here as well:

Vicki-SnS-dreamcatcher-Aug

I fell in love with this image last year as this was from the Sparkle N Sprinkle Video Kit Club for August 2017.  I have pretty much used everything from the kit with the exception of a few things explained below.

The background papers were included with the kit and I have cutted a portion of a piece to put on the top section of my card front.  For the cactus silhouettes, I have taken the Nuvo Dazzling Blue Glitter drops from the kit and used a brush to push it around.  (You can see a closer view of all of the glitter in the photo below.)   I took a piece of black card stock from my stash to mount this piece and then I heat embossed the sentiment (from the kit) with white EP.  I then took some 1/4″ Tear-iffic Tape to go across the bottom portion of the background piece.  I then took the guilding flakes from the kit and attached it to the tape. – You can see how to use these products from the kit by watching the video from Demo Donna, CLICK HERE to see it on You Tube. (P.S.  She’s fun too! :))  I then took that entire black piece and mounted it onto a piece of craft foam.  I then attached it to a top folding white A2 sized card base which also came from my stash and not the kit.

Vicki-SnS-dreamcatcher-Aug-close

Here’s a closer look at the image and all of the glittery fun texture on this design!  (You can see here how the cactus in the background really shimmer and have a unique texture by applying it!

If you take a look at that circle behind this image, I have cut out a white piece of card stock with a stitched circle die and then covered the entire piece with the Sparkle N Sprinkle Orange Marmalade embossing powder…it is so stunning how this EP looks IRL!  There are some very fine gold mica powders in it that make it really amazing looking!  Not what I expected the first time I used this, in a good way! 🙂  I then took the feather that came in the kit and added some Nuvo Liquid Glue to the ends of it and then sprinkled on some SnS Ultrafine Sassy Silver Glitter and attached it behind the image with foam tape.

For the image itself, it came in the kit already pre-colored and sized to fit on the card.  I have fussy cut the image and put some foam tape on the back with the feather and embossed circle.  I have used the rest of the Nuvo Crystal Drops from the kit and used these to color in the image with a small brush to push the glitter around.  (I was following the tutorial from Demo Donna on that one.)  Very cool as I have never tried “coloring” with glitter in this way before!

I sure had fun with this card and will be pulling out my kit again to make more I’m sure!  I like to “mix” things up a bit with them instead of making them all uniformally the same.


I also have some more projects that I haven’t finished sharing with you from what I’ve entered into my local County Fair this year, so here’s some more Christmas projects that I’ve made and had entered:

Vicki-HoopOrnaments-Fair3rd

The category for this one was “handmade ornaments – set of 3” (They were all supposed to be similar in nature as well), so of course being the paper crafter that I am, I made 3 ornaments using paper crafting items from my stash! 🙂

A while back I had bought a large supply of bambo embroidery hoops because I wanted to have a try at making these ADORABLE ornaments that I found a tutorial for last year on Splitcoaststampers.com – CLICK HERE to check out the tutorial and make one for yourself! (That tutorial called for a 3″ hoop, but mine are a bit larger at 4″ here.)

Vicki-HoopOrnament

So for my ornament here, I used a stitched circle die to cut those lovely plaid papers from Lawn Fawn (looks like it retired!) and then I also cut another stitched circle from some gray colored papers to match.  On the Gray circle, I white heat embossed the Tim Holtz Mini Weathered Winter Snowflake and then took a sponge dauber to add a bit of white ink in some places.  I placed a wood veneer snowflake over top the center of the heat embossed snowflake and then added a dot of silver Nuvo Crystal Drops in the center.

For the outside of the hoop, I’ve had this silver tinsel in my stash for a few years (looks like the package says it is for a mini tree decoration.  LOL…IDK!)  I glued it around the edge of it, attached a silver bow at the top and then ran some silver cord around the top for hanging on the tree.  They are simple, quick and easy to make, but I had lots of fun with it for sure!  So it was nice to have placed third as a bonus!

Vicki-ShakerGiftCard-Fair3rd

 

This is one of my entries for “Hand-Stamped item Other Than a Card”.  (I will share my other two entries for this category on another post coming later on!)  If you had followed along with my other blog or “know me” on Splitcoaststampers.com, then you may have seen the tutorial that I made for them called “Shaker Money Holder” (Click name to view tutorial or click the photo for it on the sidebar of my blog here.)  I basically took the same concept for it and adapted the measurements to make it a gift card holder instead.

Vicki-ShakerGiftCardHolder

I have been wanted to play with this really fun stamp set from Pink and Main called Christmas Mugs which I’m sure I’ll be using again this year!  Yum! 🙂  It was the perfect compliment for gifting a Starbucks gift card!  (This was one of the “many” purchases I had made when I went to the Collinsville, IL stamp convention earlier this Summer!  So happy that Pink and Main had a booth there!)

For this shaker gift card holder, I stamped the candy cane from the same stamp set with some red Staz On ink before adding the shaker contents to it.  I had fun coloring the mug image with Copics and glitter gel pens.  I’ve also added some shimmer to the liquid in the cup with a Shimmer glitter pen.  I then fussy cut it out and used my Xyron machine to make a “sticker” with it to attach to the plastic.  I white heat embossed the sentiment from the same stamp set over red card stock, die cut it with a banner die and attached it in the same way I did the mug.  If you follow along with my tutorial, i was finished off in a very similar manner.

Now looking at this photo, I’m thinking it would have been cute to add one of those snowflake accents to the center of the bow or around the red banner! LOL!!  It was fun and easy to make regardless and will be nice to have on hand for Christmas!  It was also very nice to see that it got placed 3rd too!

Hope you have enjoyed my post today and seeing the things I have been so busy with creating this Summer!  I always look forward to Fall and the end of the year projects so I know things will start getting really busy soon!  I have lots to prepare for the up-coming craft booths that I will be sharing with my mom this year!

Thanks so much for dropping in!

*With the exception of the above card, I won’t enter the Christmas projects in any challenges due to the fact that I had made these in July. *

Challenges for card ONLY:

  1.  Use Your Stuff – Summer Fun  (What could be more fun than laying in a suncatcher?  LOL!)
  2. Papercraft Challenges – Summer
  3. The Creative Crafters – Anything Goes
  4. Aud Sentiments – Anything Goes + a sentiment
  5. Creative Knockouts – Sparkle and Shine

 

Pink Christmas

Hello friends!  I am sort of “off track” with some other crafty things on my “to do” list and a bit behind in fact!  I have soooo many things ahead of me to get ready for and I promise I will be sharing more on that later, but scanning through my groups on Facebook, I saw a post where a challenge was getting ready to end, so I just decided last minute while I was working on other things, that I would challenge myself to get a card made before the deadline ended!  Yeah, I do that to myself…keeps the creative “MOJO” flowing, right?!  I feel good about it because it is a head start for a Christmas in July card stack that I hope to get going on!  Here’s what I came up with:

20180625_160901

I created this card for the FB Group Sparkle N Sprinkle Creative Challenges.  The deadline was right before midnight last night, but I got it done yesterday afternoon and wanted to post it within the group before the deadline ended and then I wanted to share it with you here today on my blog.  The condition for this challenge is pretty much anything goes as long as you have used a Sparkle N Sprinkle stamp/digital image somewhere on your design.  I have used the SNS Christmas Baubles stamp set that I actually received from a card kit a while back.  Instead of using it for the intended purpose of the card kit, I switched up the design a bit to make it my own.

I took the cardstock from the kit for the base as well as the pink cardstock from the kit for behind my decorative paper and under the bauble.  I die cut an oval from the pink cardstock in the kit as well as a larger oval from some gold mirror cardstock.  The bauble and holly were colored with Copics and gold gel pen.  I then fussy cut them out.  I took the pink oval and heat embossed the holly image randomly over it with the SNS Vanilla Ice EP.  I layered it over the gold circle and added the images.  The holly image was popped up with foam tape around the oval.  I die cut the decorative paper and pink cardstock with stitched border dies and placed it on the top folding white A2 card base.  I gold heat embossed the sentiment at the bottom of the card base and then I used some gold ribbon from my stash to create the bow and placed it over top of the decorative papers and bauble.  I also used the Nuvo White Blizzard Glitter Drops to go over the berries.  Looking at it now in the photo, it looks wet, but they were dry and so glittery IRL!

Hope you’ve enjoyed a little hint of Christmas coming your way!  It helps to beat the heat a bit and get a good start for the up-coming busy Holiday Season! 🙂  Thanks so much for stopping by today!

Challenges to enter this card:

  1.  Crafty Cardmakers – Wet or dry embossing
  2. The Merry Christmas Challenge – Anything Goes + Christmas
  3. QKR Stampede #301 – Anything Goes
  4. Crafting from the Heart #212 – Anything Goes
  5. Artistic Inspirations #203 – Anything Goes