Guest Designing for Digi Doodle!

Hello friends!  I’m back today to share some fun news with you!!!!

I’m very excited to finally be able to share with you that I’m guest designing for

Digi Doodle Stamps!

Today, I’m sharing my first card for them with this really adorable image:

Vicki-DDLovesMeNot-June7

I have used the Loves Me Loves Me Not digital stamp to create my card.

What I had in mind when making this card was all of that crazy rain we were having this past month and how it seemed to never end.  I also loved the flowers she was holding because my daisies came up in my back yard and they really make me happy seeing them bloom.  So I combined this image with some rainfall in the background and took away the petals from the image to make it appear as if she’s holding out her hand in the rain!  🙂  Hubby has been taking extra great care of me while all of this rain was happening around us and I think this would be a special card for someone who always seems to bring out that happy sunshine no matter the weather!  (His favorite color is blue!)  Wink wink

Vicki-DDLovesMeNot-June7-close

Here’s a closer view of the coloring I’ve done on her with Copics.  For the background, I’ve taken a white panel and stamped some rain drops from another stamp set in my stash.  I fussy cut out my colored image and attached her over top of that rain panel.  I took some Nuvo Glitter Drops and added them over the rain drops in the background behind her.  I also white heat embossed the sentiment (From MFT) and cut it out with a banner die and slipped that under her foot when placing it on my card.

It’s hard to tell in the photo, but I’ve covered her bow and top of her hair with a glitter pen to make it look like she’s been wet in the rain.

Vicki-DDLovesMeNot-June7-flat

For the rest of my card, I’ve added the raindrop background light blue stitched scallop card panel over a dark blue layer and attached some pink ribbon around them.  I’ve added the bow to the side and then attached a yellow enamel heart over that.  These panels were mounted over an A2 sized white top folding card base.

Lastly, I’ve added the image panel and mounted it over the yellow scalloped panel and another piece of dark blue cardstock that was attached with foam tape.

I hope that you’ve enjoyed my card today and it brought you a smile!  Thank you so much for stopping by with me today!  I will be having another really super fun post to share with you tomorrow, be sure to stop by!

Challenges:

  1.  Love to Scrap – Anything Goes
  2. Creative Craft Cottage – Eileen’s Anything Goes (Digi Doodle is sponsoring!)
  3. Pammie’s Inky Pinkies – PIP1922 Anything Goes
  4. The Paper Girls – Top 5 Faves (Coloring, sparkle, hearts, ribbon, flowers)
  5. Watercooler Wednesday – WWC224Anything Goes Feminine
  6. Crafting with an Attitude – Anything Goes

Anything Goes at Cute Card Thursday With Curly

Hello friends!  I hope you’re all having a wonderful week so far!!  It’s really starting to feel like Summer now with the warmer temps!

Today is a new challenge this week over at Cute Card Thursday!  This week we have our “Anything Goes” challenge with our sponsor Whimsy Stamps!  So of course, I am using a cute image from Whimsy Stamps for my card today:

Vicki-WSCurly-June6

Tee hee!  This little guy holding the tiny “sea creature” makes me smile and giggle!  I’m not really sure what reaction he has about it!  His name is just as cute too!  This is Curly from Whimsy Stamps.  I thought he needed a scene, so I made one for him.

I started with some Bristol Smooth watercolor paper and masked off the line between the sky and the sand.  I used my Distress Inks to blend in the colors.  After doing the sky, I thought that it was a bit too dark, so what I did was take a baby wipe and swiped it across which lightened up the colors the way I wanted them for the sky.  The bottom “sand” portion was also masked, and I blended the bottom blue color into the sandy colors which created a nice shoreline.  I then took a water bottle and spritzed some water droplets over it to create “texture” for the sand.  I also took some Copic markers to create more texture with the pointillism technique, plus added some white ones with a gel pen.  the water at the bottom was covered with a glitter pen.  (You can see better details in the photos/description below.)

Vicki-WSCurly-June6-close

So, I’ve got him all colored up in the following Copic markers:

  • Flippers/water gear – B32, B34, B37, Y11
  • Swim Trunks – R32, R35, R37, Y11, Y15
  • Sea Creature – BV23, BV29
  • Hair – E41, E43, E44, E47
  • Skin – E000, E00, E02, E11, E21, R20
  • I used gel pens to color lines on trunks and cheeks, I’ve used a glitter pen over the “sea creature” and his flippers along with the bottom water area.

I fussy cut this image and used some liquid glue to attach over my scene.

Vicki-WSCurly-June6-flat

For the scene, I stamped the birds in the sky and a star fish image from an older Whimsy Stamps clear stamp set. I then took the sentiment from the WS Everyday Mini Sentiments and white heat embossed it over a black strip of cardstock and then used my scissors to cut out a banner to attach over the scene.  I layered this over another piece of black cardstock that was attached to an A2 sized top folding white card base.

Lastly, I’ve taken some WS It’s a Party enamel dots and added them to the card.

Hope you’ve enjoyed my card today! Thanks for stopping in!  I’ll be seeing you tomorrow for some fun news!

Challenges for this card:

  1.  A Bit More Time to Craft – Anything Goes
  2. Crafty Friends – Men/Boys
  3. Sweet Stampin’ – World Ocean’s Day/Anything Goes
  4. Use Your Stuff – Summer Fun
  5. Always Fun – Summer Fun
  6. Unicorn – For the Men/Boys

2 Crafty Critter Crazies Has So Mushroom

Hello friends!!  Yay!  Welcome to June!  I am hoping that this month will be a bit more dry than what it has been lately.  I’m growing tired of flash floods!  Rain vibes sent to those that need it too!

Today starts a brand new monthly challenge over at 2 Crafty Critter Crazies as well!  So please hop on over there and play along with us!  It’s an easy challenge!  All you have to do is add a critter somewhere on your project!  That’s it!

So here’s what I’ve made for the challenge:

Vicki-2CCC27-RickDennis

Isn’t he a cutie?  Now, I’ve never seen a teddy bear on a mushroom before, but they look so happy together, so I think it works! 🙂  Our sponsor for this challenge is Rick ST Dennis and we were provided some images to use.  I’ve used one of the images from the 2 Bearii Kawaii digital stamp set.

After coloring him up, I’ve used the Lawn Fawn Stitched Rectangle dies to cut him out with and then I’ve used some Tumbled Glass Distress Ink and an ink blending tool to go around the edges with it.  I also used this ink and tool to sponged some clouds in the background on a white piece that was cut with another Stitched Rectangle die.  I thought it would be fun to add some splatters, so I carefully covered up the image and added some splatters with the same distress ink that was watered down and splattered both the cloud background and image panel.

For the bottom of the card, I cut a piece of green card stock with the LF Mushroom Border die.  I also used this die set to cut out the mushrooms with some vanilla and red cardstock.  I white heat embossed the punny sentiment at the bottom of the grass border from the LF Oh Gnome stamp set.  I’ve attached these borders to the bottom of my cloud panel and lined it up to cut it out again with the stitched rectangle die so that it matched with the background of the card.

I then added some twine around the cloud panel and then attached this piece over top of a white top folding A2 sized card base.  Lastly, I took some foam tape and added it to the image panel and then attached the twine bow with the chipboard heart in the center of the bow.

Vicki-2CCC27-RickDennis-close

Here’s a closer view of the image details.  I’ve colored the image with Copic markers and then went over the bear’s bow with a glitter brush pen.  The white dots on the mushroom was covered with some Nuvo Glitter Drops.  For a bit more personality, I have decided to take a black marker and make dots in the center of the eyes on both the mushroom and the teddy bear.  I’ve also added some white dots on the teddy bear’s cheeks.

Vicki-2CCC27-RickDennis-flat

I have to say that this card was so fun to put together!   I hope you have enjoyed it too!  Thanks so much for stopping in today!

I will have another post coming up shortly to share a new release with you!

Challenges I’d like to enter:

  1.  Double Trouble – (Doesn’t begin until June 3rd!) – Use a Critter and used cloud stencil in the background.
  2. Sweet Stampers – Animals
  3. Simon Says Stamp Wednesday – Anything Goes

Thinking of You with Fleur

Hello friends!  I hope that you had a lovely weekend!  Here we are with the last week of May already and Summer is showing itself in many ways right now.  I do love seeing the flowers everyone has been sharing posts of with their yards full of blooms coming up everywhere!

Today I have this card using a cute Whimsy Stamps Digital stamp:

Vicki-Fleur-May28

This cutie was released this month by CC Designs called “Fleur“.

I just love the ring of flowers in her hair!  I’ve actually printed her out twice so that I could cut a few extra flowers to add to the accents of my design!

For my card, I’ve taken a panel from the Rustic Woods and Brick digital papers and used that for the background of my design.  I took a marker and added some dash marks for a stitch look.  I added this piece to a 5″ square top folding suede card base which I sponged around the edges with some white ink.  I did the same for the die cut fence panels and the circle layer behind the image.

I’ve taken a piece of decorative paper from my stash and sponged some ink around it and also wrapped some organdy ribbon around it before attaching to the card front base.  I then die cut some grass to go over my fence border.  My image was cut with a stitched circle die and sponged around the edges with the same ink as the decorative paper.  This was layered over top of the suede circle panel, and these were popped up with some craft foam.  I’ve added the bow and the cut-out flowers from the extra printed out image and then I’ve added a flower gem in the center of the bow.  Each flower including the ones on the image were filled with some Nuvo Honey Gold Glitter Drops.  I stamped a sentiment from the Whimsy Stamps Everyday Mini Sentiments clear stamp set with the same suede color ink.

Vicki-Fleur-May28-close

Here’s a closer look at the coloring on this image.  I’ve used the following Copic colors to color her in with:

  • Hair – Y00 (used for base), Y11, YR21, YR24, YR27
  • Skin – E21, E11, E00, E000, R20
  • Outfit/Shoes – E89, E87, E84, E81
  • Flowers – BG000, BG10
  • White gel pen used for cheeks and around hair flowers.
  • Ground/shadow – C1, E0000

You can also see the details from the Nuvo Glitter Drops that I’ve used in the center of the flowers including the one in the center of the bow.

Vicki-Fleur-May28-flat

Thanks so much for stopping by!  I enjoy reading your thoughts! 🙂  See you soon!

Challenges:

  1.  Little Red Wagon – Flower Frenzy #498
  2. The House That Stamps Built – M2219 Anything Goes
  3. Pammies Inky Pinkies – PIP1921 Anything Goes
  4. Crafting From the Heart – Anything Goes

Paper Nest Dolls Guest Design Spot with Fishy Kisses!

Hello friends!  Happy Memorial Day and I hope you’ve been having a great weekend!  I would like to take a moment on this day to stop and give thank you and remembrance to all of the U.S.  service men and women who’ve served our country.  Your service will never be forgotten.

I am very excited to share a card I made with an image that Christine sent me to play with from the Paper Nest Dolls!  I’m sharing my card as a Guest Designer for her and I’m thrilled to be apart of it with her adorable images!

Vicki-PDMermaid Ellie Seahorse

I am using this CUTE image called Mermaid Ellie with Seahorse for my card. Isn’t that little seahorse she has her arm around adorable?!  She was so much fun to color too!

There is just so much shimmer/shine and sparkle on this…so I hope I can capture it all for you!  For the card, I’ve used the Tonic Basic Oval dies to cut her out with, but I’ve used the “Out of the Box” technique and cut out her tail before cutting the rest of the oval.  You can see in the photo below how I’ve slightly curled her tail upwards.

The background of the card was done with a stencil and ink blending.  I thought it was so fun as it reminded me of the scales!  I cut this piece out with a square stitched rectangle die and then layered a piece of aqua colored mirrored cardstock that I’ve also used as an oval layer behind the mermaid image as well as a strip at the bottom.

For the strip at the bottom, I’ve wrapped around some linen thread and tied a bow with it.  I’ve also wrapped around some ribbon to the layered stencil and mirror cardstock panels and then attached them to a 5″ square top folding card base.

I’ve taken a sentiment and heat embossed it with some “Mermaid Tail” EP and cut it out with a word banner die and sponged around the edges of it which I slipped under the first layer of the oval cut mermaid.  I’ve added some burlap and a few of the sea shell sequins behind the oval image panel and popped her up along with the sentiment banner with some foam tape.  Lastly, I added some half-back pearls randomly over the design.

Vicki-PDMermaid Ellie Seahorse-close

Here’s a closer view of the image and all of the shimmer and sparkle details.  I’ve colored her up in the following Copic markers:

  • hair – 100, W9, W7, W5, W3, W1
  • Mermaid shells – BG13, BG10 (covered with glitter brush pen)
  • Mermaid Tail – YG25, YG13, YG11, BG000 (pointillism with darkest and blender 0 and also green and white gel pens.  The fin at the end was also covered with a glitter brush pen.)
  • Mermaid Skin – E21, E11, E02, E00, E000, R20
  • Seahorse – V17, V15, V12, R11, R00, R000 (pointillism with V colors and blender 0)
  • Shading – BG000

Vicki-PDMermaid Ellie Seahorse-flat

It’s hard to see it from the other angles of the card, but it looks like the sentiment heat embossed with “Mermaid Tail” shows more of the shimmer in it as well as the ribbon.

Challenges:

  1.  Cheerful Sketches – using sketch
  2. Tuesday Throwdown – Stenciling
  3. CCEE Stampers – CCEE1921 – Use a die
  4. QKR Stampede – #349 Anything Goes
  5. Cupcake Inspirations – CIC471 – mermaids

Cute Card Thursday is Square

Hello friends!  It’s “Hip to be Square”, right?!  That’s what the theme of this week’s new challenge is over at Cute Card Thursday!  So please hop on over and check out the inspiration and play along with us!  Here’s the card I’ve made for the challenge:

Vicki-CCT583-square

What better card to make than one for a crafty friend! 🙂   I’ve used a past Simon Says Stamp card kit from February 2018 for this one.  I thought that I would carry the “square” theme throughout the design. – It’s great to pull out past kits and have a play with them!

The stamp set is called SSS Crafty Friends and I’ve randomly stamped some of the images on a vanilla-colored cardstock and then cut out each one with a stitched square die cut.  I’ve also used the same die to cut out a square piece of decorative paper contained in the kit which also has a colorful square pattern on it.

For the paint pallet image as well as the tube of paint panels, I took some of the watercolor provided in the kit and added it for some color with a water brush.  I took some twine and wrapped it around the top left panel with the hearts and sentiment and then placed the bow over top.  I then added the scissors wood veneer over top which was also included in the kit.  The turquoise-colored cardstock base and squared layered panels also came from the kit as well.

Vicki-CCT583-square-close

Here’s an even closer look at the different squared panels.  You can better see the watercolor over the panels as well as the turquoise colored Nuvo Glitter Drops that I’ve added to the paint tube on the bottom panel.

Vicki-CCT583-square-flat

Hope you’ve enjoyed my “SQUARE” card today!

Thanks so much for dropping in!  I’ll see you soon!

Challenges:

  1.  Crafty Friends – Anything Goes
  2. Pammie’s Inky Pinkies – PIP1920 Anything Goes
  3. Through the Craft Room Door – Anything Goes
  4. Crafty Creations – Anything Goes

Fairy Princess Bunny With a Pocket!

Hello friends!  Hope you have enjoyed your weekend.  Yay!  We are finally getting some decent weather to be outside in!  It’s been rainy and chilly for a while, so it’s been nice to see some sun the last few days!

Today I have this really sweet image to share from Whimsy Stamps May Digital release and a fun extra added element with it!

Vicki-PC Fairy Princess Bunny Tag

I have made a tag using this really sweet Pollycraft image from Whimsy Stamps called Fairy Princess Bunny.  Isn’t she so sweet?!  I found some pretty papers to go with her and placed it over a purchased kraft colored tag that I sponged some white ink around the edges.

After placing the papers where I wanted them and trimming it down, I also attached a lace trim on each end of the papers over the tag.  The papers also had a bunch of sentiments included in the pack, so I added the circle sentiment to the tag and then die cut a kraft piece to layer behind it.  I also added some flowers and the ribbon at the top and then finished it off with some clear sequins.

Vicki-PC Fairy Princess Bunny Tag-close

Here’s a closer view of the coloring I’ve done on this cutie.  I’ve used Copic Markers to color her in with using the following markers:

  • Dress, shirt, shoes, socks – B37, B34, B32, B01, B00, B000
  • Bunny, bunny ears – R11, R00, R000, C3, C1, C0
  • Wings – R00, R000, E000, BG000
  • Hair – YR30, E41, E43, E44, V95
  • Skin – E000, E00, E11, E21, R20, R00
  • Grass – G24, G21, G20
  • I used gel pens to make dots on wings and color in the crowns on the girl and bunny heads.  I also used a Wink of Stella glitter pen to go over the wings.

After I colored her in, I cut her out from a circle stitched scallop die and then sponged around the image with a cloud stencil and distress ink.  I also sponged around the edges of the scallop circle with another color of distress ink and mounted her over the tag with a piece of craft foam behind her.

Vicki-PC Fairy Princess Bunny Tag-otherside

So, when you flip the tag over, you can see that I’ve made a little pocket with the same papers I’ve used on the front of the tag.  I thought this would be a cute way to give out a gift card to your “Fairy Princess”.  The tag happens to be the perfect size for adding a pocket for a gift card to fit into.

Vicki-PC Fairy Princess Bunny Tag-flat

I hope you’ve enjoyed my little tag creation today!

THANKS SO MUCH FOR DROPPIN BY!!  HAVE A GREAT DAY!!

challenges:

  1.  Crafty Creations – Anything Goes
  2. Fab ‘N’ Funky – Anything Goes #437
  3. Crafty Catz – Anything Goes with optional twist of females
  4. QKR Stampede – Anything Goes #347
  5. Crafting By Designs – Fantasy

Bubble Bath Beauty

Hello friends!  Yes, I’m still here! LOTS of fun stuff to share!

Today, I have a silly kitty card to share with you today:

Vicki-Bath Cat-May7

Oh my, that face just really cracks me up!!  It’s been several years since I have ever had to give a cat a bath, but I believe that’s pretty much how they feel about water in general.  I have used this Whimsy Stamps digital image called Bath Cat by Crissy Armstong.  (It was previously released as a rubber cling stamp, but now you can also get it in digital format if you prefer that!)

I started out my card with a piece of white cardstock and clear heat embossed several of the solid circle images from the Whimsy Stamps Circles Circles Circles clear stamp set.  I then took a few of the distress ink colors and blended them over the heat embossed circles.  The ink resisted those and then I spritzed it with some water and dapped it with a paper towel for water droplets.  I heat embossed the sentiment with white EP and cut it out in a banner to attach over my background.

The circle inked background was corner chomped on two of the corners and then I placed it over a blue A2 sized top folding card base which I also corner chomped the same two corners on that as well.  I then added the image panel and popped it up over some craft foam to attach to the front of the card.  I then cut off the edge of the circle with my scissors and lastly added some clear sequins to the design.

Vicki-Bath Cat-close-May7

Here’s a closer look at the coloring I’ve done on the kitty.  I’ve used the following Copics to color him in with:

  • Kitty – W7, W5, W3, W1, R11, R00
  • Bathtub – B24, B21
  • Bubbles – BG000
  • Duckie – Y17, Y15, Y13

After I cut the image out with a circle die, I sponged around the edges of it with some of the distress ink I used on the background.  I used a Wink of Stella glitter pen on some of the bubbles and then used some Nuvo White Blizzard Glitter Drops on the water drops.

Vicki-Bath Cat-flat-May7

This one gave me a chuckle and sometimes even when you are feeling yucky, you just want someone to tell you that you are beautiful!

Thanks for dropping in today!  I’ll see you again soon!

Challenges:

  1.  Simply Create Too – Anything Goes (no twist)
  2. Daisy Chain – Anything Goes
  3. Pammie’s Inky Pinkies – PIP1918 Anything Goes
  4. Get Creative – Anything Goes (no twist)
  5. Crafty Animals – Anything Goes + animal

2 Crafty Critter Crazies – You are my Happy

Hello friends!!  Happy April Fool’s Day! 🙂

Well, there’s “no fooling” here today as I bring you a post to share the creation, I’ve made for a new challenge over at the 2 Crafty Critter Crazies Challenge Blog!  Since it’s the first of April, we have a new challenge starting with the “Anything Goes + critter” theme in mind!  Hope you will join us with your critter creations!

We are being sponsored by Digi Doodle Studios and this is the card I made for the challenge this month:

Vicki-2CCC-DigiDoodle-Mia

Our sponsor was kind enough to share this very sweet image called Mia which I’ve used for my card today.  This is my first experience with these images, and I must say they have some really cute ones in their store, so hop on over and check them out!

I’ve colored her up with Copic markers including drawing extended lines for the grass and coloring it up all the way across and down.  I cut it out with a cross stitched rectangle die and then used a sun ray stencil to ink some yellow behind her by taping off the grass edge, so I didn’t get any on that part.  I then stamped the sentiment in black ink over top of that.

To continue on with the yellow color theme I’ve got going on, I cut out a piece of yellow glitter cardstock that was cut out with a scallop rectangle die (retired from Lawn Fawn) and attached it to the back of the image panel.  I took some plaid papers for the bottom portion of the A2 white top folding card base and then attached some yellow grosgrain ribbon across the top and then attached the image panel and then added a yellow ribbon bow along the edge.  Lastly, I finished it out with some yellow rhinestone crystals.

Vicki-2CCC-DigiDoodle-Mia-close

Here’s a closer look at the coloring I’ve done on the image.  I took a black gel pen to color in the eyeball’s circles.  I wasn’t sure how to go about coloring the eyes, but this is the way that made the most sense to me.  I also went around the edges of the butterfly with the black gel pen.  I took a glitter brush pen and went over the liquid in her cup.

Vicki-2CCC-DigiDoodle-Mia-flat

I have to add that this image really got me thinking about past memories with my sweet little Mocca and how we would go out on nice Spring days like this.  She certainly was always “my happy” for sure and I still miss her like crazy.  I’m sure any of you that have lost pets understand what I’m saying.   It’s great to have the memories we’ve shared after all this time!

Thanks so much for stopping by!  I appreciate it so much!

challenges:

  1.  Crafty Friends – Spring
  2. Crafty Gals Corner – Spring is Here!
  3. Krafty Chicks – Coffee, tea or hot cocoa
  4. As You Like It – Favorite Coloring medium – Copic Why?  It’s my favorite “go to” coloring method and I love the way the markers blend together for shading and highlight effects.
  5. Creative Knockouts – Outside Fun
  6. Allsorts – Use Yellow
  7. Digi Doodle Studios Challenge – #15 Anything Goes

Thinking of Tulips With Whimsy Stamps

Hello friends!  I’m here!  In case you were seeing nothing on my blog or something weird going on within the last day, I appologize!  I was messing with something and pretty much should have left things alone!  I think we are all back now and everything is good!  Whew!  (Don’t worry, I won’t be doing that again!)  I guess I thought I was savvy with tech things, but it turns out, I’m not!  Ha!

So now that I’ve got things back to normal, I can share my card with you this evening!

Vicki-WSTulip-March19

This is one of the adorable March digital releases from Whimsy Stamps called Tulip by CC Designs.  She was so fun to color, and I was thinking about tulips the entire time I was coloring her up!  Tulips are my favorite flower and I have a brick foundation with little buds of daffodils and tulips coming up!  Of course, this makes me excited about Spring and the warm weather we are starting to get!!  (Hopefully I will be able to share photos of how they come up soon!)

Whimsy Stamps has also released some really cool digital papers that I’ve used for the background of my card here called Rustic Wood and Brick Collection.  (Reminds me of my brick foundation where the flowers are coming up!)  I have also used a retired Whimsy Stamps die set called “Garden Flowers” that happened to have a tulip in it, so I cut several in white cardstock to go along the bottom of the card.  I also took one and inked it up in the colored I’ve used on my image and tied an additional thread bow at the top of it.

The sentiment on the bottom of the image panel comes from the Whimsy Stamps Everyday Mini Sentiments clear stamp set.  I white heat embossed it and then cut out with the Whimsy Stamps Quick Strips die set.  I used a MFT stitched scallop die to cut out the image from and layered her with some red cardstock.  Before I added the blue ribbon, I attached the piece of black cardstock where my layered image panel would go and wrapped it around the brick background.  I then added a white button with a linen thread bow in the center of that.  (This is what I used on the colored tulip.)  All of these layers were then mounted onto an A2 sized top folding white card base.

Vicki-WSTulip-March19-close

Here’s a closer look at her all colored up with Copic markers!  You can purchase them at Whimsy Stamps. These are the colors I’ve used on my image today:

  • bow, jacket, skirt, tulips – B97, B95, B93, R39, R37, R35, YG25
  • shirt, socks, shoes – BG000, E87, E84, E81
  • hair, skin – E27, E25, E23, E21, E11, E00, E000, R20
  • butterflies – C5, C3, YR04, YR02, Y13
  • C1 around image and white gel pen for flowers and jacket along with red and black gel pens for dots on butterflies
  • covered the red portion of die cut tulip with Wink of Stella clear glitter brush pen.

Vicki-WSTulip-March19-flat

I hope you’ve enjoyed my card this evening!  Are you as ready for those Spring flowers as much as I am?  What are your favorite flowers?

Thanks so much for stopping in today!!  See you again soon!

Challenges I’d like to enter my card for:

  1.   Words 2 Craft By (W2CB63) – “Happiness held is the seed, Happiness shared is the flower.”
  2. As You Like It – Dies or Stencils & why? (I love using dies because I feel there are so many fun things you can do with them/versatile, even it you don’t stamp!)
  3. A Bit More Time to Craft – #88 Anything Goes
  4. Challenge Up Your Life – Bye-Bye Winter