Finnebair – Stamped Smiles

**THERE WILL BE TWO POSTS FROM ME TODAY. THIS IS THE FIRST POST OF TWO**

Hello friends and happy November! The weather has finally decided to give us a bit of a cool down and it feels more like that Autumn Season right now. We’ve been waiting on some rain as it’s been dry and then the wind blew in some cool with it too! I always like to give Autumn it’s “due justice” as it never seems to have a spotlight as much I think it should.

I’m very excited to share a mixed media project I made for a guest design spot (that I had won a top spot from a previous challenge). I was asked to join this month as a guest designer for the Creative Artiste Mixed Media Challenge Blog!

The theme for these monthly challenges is always “Anything Goes Mixed Media“. So be sure to check out the wonderful inspiration from the team and share your mixed media project over there! I look forward to seeing your inspiring makes!

I’m always excited when I have an “excuse or reason” to get out all of my mixed media things and play around to make something! I thought since it was November, it would be a great time to pull out the Autumn media:

I made this fun center/accent piece for Autumn and pulled out the cool Finnebair rusty metal teapot from my shelf to finally decorate on! It actually looks pretty cool by itself, but I had to add some other details to it that I thought would make it my own.

For the base: The only thing that was missing for me was a “handle” for my teapot and I went through my husbands things and found an old metal coat hook that I had him screw onto the side. I also had some extra pieces laying around from the molds I made with resin, so I attached those along the frame opening with 3D matte gel. I wanted to also add some texture to my teapot and that’s where I added some crackle paste in various areas…all of these things had to dry for quite some time. It didn’t look pretty at that point as those pieces were white. LOL The “hurry up and wait” had begun.

After the long drying time: I started by covering the entire thing with two layers of black gesso so that all of those white areas were completely covered up. I pulled out some acrylic paints in Raw Umber, Burnt Orange and very light touch of Marigold. I started with the darkest color first and did not use a brush to apply the layers. Instead, I used a sponge after each layer was dry. I very lightly and sparingly used the yellow. I even went back in with the Burnt Orange and Raw Umber to get the look I was wanting.

After all of the painting, I used more of the 3D matte gel and wrapped some jute/rope around the top handle.

Going to the right side of the teapot, you can see where I’ve added all of that crackle paste and the painting that I’ve done over it. The only thing missing at this point was the “highlights” to make it look like a found rusty metal teapot. Since it was Autumn themed, I pulled out the Finnebair Vintage Gold Wax and rubbed over the raised areas with my finger. You can see the look it gives over the paste and decorative molds around the frame and even the raised “dots” along the top of the teapot.

Moving over to the left side of the teapot, you can see where I’ve screwed in the metal hook to the side of the teapot. I just incorporated the silver screws with the design by adding paint. I told my husband that I thought it looked cool to turn the coat hook up-side-down as it looked more like a handle.

And now if we take a closer look to the inside of the teapot frame, you will see an Autumn scene in there. The back of the teapot comes out so you can decorate how you’d like. I know it’s a bit hard to see in the photo, but I found some leafy background paper to attach over the metal backing and I also splattered some gold paint over it.

For the bottom of the teapot, I attached some woodland moss mixture with 3D matte gel and also used it to attach the gold splattered gourds, eucalyptus, a wood slice, a cardboard squirrel, sticks and some acorns. I also went around the outside areas to attach some Fall leaves and more acorns. The only thing I didn’t have in my stash were the acorns and sticks. My husband said that he could get them for free…and of course he went to our local park and picked them up! LOL So those are the only “real” things on my teapot.

I had thought about maybe adding some fairy lights inside at the top so the inside would be more visible, but not sure if I would like that or not…what do you think?

And in case you might want to know, the measurement of the teapot are 12″ across (including the added metal coat hook), 8″ tall and about 3.5″ in depth. I currently have it sitting in my cabinet at home.

I hope you’ve enjoyed my mixed media teapot! I would love to see your mixed media project as well if you play along with us this month at the Creative Artiste Challenge Blog!

Thanks so much for stopping in! Stay tuned as I will have another post coming up in a couple of hours!

Challenges: (if this project doesn’t fit with your challenge, just delete.)

Ally’s Angels – #87 Anything Goes
613 Avenue Create – October Anything Goes with optional: lots of leaves (Fall/Spring)
Dragonfly Dreams – October Anything but a Card
Krafty Chicks – #740 Anything Goes
Classic Design – #10-2024 Anything Goes with optional twist: Anything but a card
The Creative Crafters – #81 Anything Goes

Hello friends! I hope that you’ve had a wonderful week so far and looking forward to the up-coming July 4th weekend for those of us celebrating in the U.S.! Just came back a few days ago from my son’s wedding which was really beautiful and a remarkable time celebrating with all the family! (I will share on that in the future here.)

Today I’m very excited to share my mixed media project as the July guest designer over at the Creative Artiste Challenge Blog! So if you enjoy creating with mixed media, please check out the blog and have some fun playing along with us this month!

I wasn’t required to create anything specific for this challenge as it’s always an “Anything Goes Mixed Media” theme. So I thought this would be a great time to share the project that I made and taught recently for a crafty friends retreat. (I will share more on my completed projects in the future here too!)😉

Vicki-MixedMediaBirdhouse

I have made a mixed media birdhouse with a “stand” that is approximately 14″ tall with a width of about 6″ across the birdhouse roof edges.

I purchased a paper mache birdhouse that came without the square layer underneath it or the “perch”. I added those using my own chipboard and craft stick from my stash. The “tree stand” was constructed from an old stairway post from my house that had been stored in our shed out back. We had no use for it, so I had my husband cut down the length that I wanted for the birdhouse, attached the square chipboard piece to it and glued the birdhouse on top of that. The very bottom was created with my husband’s saw and pieces of left over wood he had which was then screwed to the stairway post. Here’s what the items looked like unassembled…

For the “tree bark” look on my post, I covered the entire post with some crackle paste and let it dry along with all of the glue and white gesso to prime everything. For the “roof” of the birdhouse, I took a couple of pieces of regular cardboard that you would throw away from a box. I cut it to size for the roof, ripped off the layer to expose the corrugated texture underneath and glued it to the roof. This was primed with black gesso.

Here’s a closer view of the roof. To get that “rusty” texture look, I used the Finnebair Rust Affect Pastes. Not only does it give that look, it also gives the texture too. The class seemed to enjoy that part. I’ve also added some more textures with the art stones, wax and moss. You will also notice that I’ve used this same method with the “perch” too.

The other side of the roof also has added texture with art stones as well as a tin mechanical butterfly that was painted up with some Sparks sparkle paints.

For the “tree post” I added some paint(s) mixed with touches of water to make the texture stand out to get that “tree” look to it. It was wrapped with a vine ribbon and flowers that were painted to coordinate with the project and then attached to the vine. The centers of the flowers were made with beads, painted and waxed over them.

And here’s a closer view of not only the post and flowers, but the fence which was also painted with watered down paint as well as painted mushrooms that were actually a bright red color. I wanted to customize it to coordinate with the project. I’ve attached some decorative rock and a little crystal ball at the bottom of the platform along with the green moss which covered up the rest of the areas.

As for the birdhouse areas, I ripped up pieces of printed vellum and randomly attached those pieces as desired. I also took some texture paste and a brick stencil to go over areas of the birdhouse being careful where I wanted to place my different clay molds. I made all of the clay molds shown and enough for everyone in class too. This is where all of the art stones were attached too. At this point is where the clear gesso comes in because of the printed vellum that you don’t want to get covered up with the white. Once attached glue pieces and paint dried, this is where I painted with watered down blue Pasto Paint so that the vellum is still visible through it. I also painted a very light washing of white paint to go over the brick areas for highlights.

And lastly, to create the “runny rust” colors around the clay and textured areas, I used a couple of different paints that were sprayed with water to let them drip down over the areas. This gives shadows to the texture and the illusion of your rusty roof affecting the sides of the birdhouse.

All of the textures were lastly highlighted with silver wax paste and the rest was just adding the green moss and the Spanish moss in the hole of the birdhouse. I have a photo of the class finished pieces that I will share in an up-coming post along with other projects I made for my classes during the retreat.

**Really hope you’ve enjoyed my mixed media birdhouse project and given you some inspiration in some way! Please be sure to stop in at the Creative Artiste Mixed Media Challenge for more inspiration by the team…hope you can join in the fun with us this month!**

Thanks so much for stopping in and I’ll be seeing you soon!

Challenges: