A Beary Sweet Christmas Tag for 2 Crafty Critter Crazies (2nd Post of 3 today)

Hello friends!  I’m back with another new challenge for you today!

It’s the first of the month, so that means it’s time for a new monthly challenge over at 2 Crafty Critter Crazies!  As always the challenge will last for 1 whole month and all you need to remember is to add a critter to your creation!  We look forward to seeing your critter makes this month!

Our sponsor for the challenge this month is Sparkle N Sprinkle!  They were kind enough to supply our team with some darling images to use for our creations!  Here’s what I’ve decided to make for my design:

Vicki-2CCC-SnS-tag

I have used this darling digital stamp set called A Peppermint Christmas  [DIGI3148M] from Sparkle N Sprinkle.  They offer colored versions with this digital set, but I opted to use this  cute polar bear and place the frame around him along with adding the sentiment above his head so I could color it.  I used a Word doc. to design it before printing it out.  Once printed out, I cut it down to size for my black tag and rounded the corners with a corner chomper.

I’ve been trying to develop my skills a bit with colored pencils and invested in a large set of them recently.  So this is what I have used to color in the images of my tag.  After coloring it all in, I thought…. I couldn’t use a Sparkle N Sprinkle image with no sparkle!! So I took out my Quicky Glue Pen [quicky] and then sprinkled some SnS Waterscape Glitter (Semi-Transparent) [G1108] over the snowflakes and dark gold star bursts.  For the stars, I’ve sprinkled the SnS Lemonade Ultrafine Glitter (Semi-Transparent) [G1091] over it for a bit more brighter sparkle!  I’ve also covered the peppermint candies with the Nuvo Aqua Shimmer Glitter Gloss Pen [888N] for some shimmer.  AND…if that wasn’t enough, I took the Quickly Glue Pen again and went along the edges of the white image panel and added the Waterscape Glitter to the edges.

For the assembly of my tag, I’ve used a pre-made tag from Graphic 45 and sponged around the edges of it with white ink.  I took some green colored glitter paper from my stash and added a strip of it across the center of the black tag.  I then added some pink silk ribbon strips on each side of the glitter paper.  I then used some craft foam to pop up the image panel and placed it on the tag.

I finished it off with a pink silk ribbon bow and added some more of it to the tag hole for a hanging element and tied that together with a piece of white twine.  Decided for a finishing touch to add a sparkly snowflake gem in the center of the bow.

I hope that you have enjoyed my critter project and be sure to check out the rest of the inspiration from the design team over at the 2 Crafty Critter Crazies Challenge Blog and come and join in the fun with us!

I have some REALLY exciting news coming up shortly after this post!!!  TEE HEE!!

Thanks for hanging in there with me!

Challenges:

  1. QKR Stampede – Anything Goes (319)
  2. Sunny Day Crafting – Animal
  3. The Holly and Ivy Christmas Challenge – Anything Christmas Goes
  4. The Merry Christmas Challenge – Anything Christmas Goes

I’m Guest Designing for the Retro Rubber Challenge

Hello friends!  I’m super excited to have been asked to be a guest designer for one of the challenges over at the Retro Rubber Challenge blog!  Yay!  I really enjoy playing along in their challenges when I feel the need to break out some of my older stamps that have either been unused or neglected for a while.  If you have some stamps that are at least one year or older…or older yet as many of mine can be, then this is a great challenge to play along with!  Be sure to pop on over there and see what it’s all about, check out the inspiration from the design team and play along!

Here’s the card that I’ve created for the challenge, but be sure to check out the full details along with lots more photos below!

Vicki-rrcb97-GDT

For the current new challenge, they have come up with this fun “tic-tac-toe” board to play around with:

RRCB 97

For my card, I went with the bottom row of “animals, window and circles“:

Vicki-rrcb97guestDT

I have pulled out some stamps from my “penguin stash” as I like to call it!  LOL!  I have lots and lots of them and most of them are years and years old.  I’m actually not really sure how old this stamp set that I’ve used on my card today is, but it’s from Darcie’s Stamps and they haven’t been in the store for quite a while now I think.  (They still sell really darling stamp sets and there are a few on my list!) 🙂  I’m also not sure of the name as I don’t see it marked anywhere on the set.

For my card, I’ve taken a circle die and cut out my colored images.  I had to mask the hat so that it looked like the penguin was wearing it as well as mask that giggling penguin along with the hat so that I could stamp the mug so that it looked like the penguin was in front of the mug.  I also white heat embossed the sentiment and cut it out with a banner die at the top.  The sentiment also came with the stamp set.  I cut out a scallop circle and then cut the center out with the same size circle as the penguins to create the frame around the penguin scene.  I’ve used some older SU! papers from my stash to go along with my theme and then lastly added some red baker’s twine at the top along with some white enamel dots as well as a cute little wrapped up peppermint candy accent.

I have cut the center of the heart on the mug with my craft knife and now we are going to zoom in on the mug….

Vicki-rrcb97-GDT-windowcloseup

Here you can see the glittery heart window with the penguin on the other side!  I have made a window by cutting out the heart on the mug and then on the other side, I’ve used some packing tape with the sticky side exposed through the window so that I could add some glitter to it.

Vicki-rrbc97-GDT-insidecard

And then of course when you open the card, you can see this cute little penguin trying to balance himself on these glittery rolling peppermint candies!  LOL!  This is why the penguin on the front was giggling.  I think they had too much sugar!

I colored in a penguin from the set, fussy cut him out and then layered him over this line of peppermint circles that I found from an older card kit I had in my stash.  It’s from a piece of patterned paper that I cut out.  I added some shimmer over them with a glitter brush pen.  At the top you can see the cut out heart I made.

Vicki-rrbc97-GDT-inside

This is just a closer veiw of the penguin on the inside.  There is plenty of room above him to write a message.  Wasn’t sure if I wanted to leave this blank or put a Christmas sentiment on the inside yet.

I hope you’ve enjoyed my card for today and I hope you will stop by the Retro Rubber Challenge to see the wonderful inspiration from the team and play along with us!  I can’t wait to see what you come up with!

Thanks for stopping in! – P.S.  don’t forget to enter my give away if you haven’t yet! (I took a photo and added more items to it!)  Check out the home page of my blog to see the post and enter!

Challenges:

  1.  Simon Says Stamp Wednesday – Get Ready for Christmas
  2. 4 Crafty Chicks – (4CC423) Something Old is Something New (old stamps and paper)
  3. Crafting with An Attitude – Anything Goes
  4. Happy Little Stampers Christmas – Anything Goes with Optional Twist:  ribbonoctober 2018
  5. Crazy 4 Challenges (C4C455) – Make any card in honor of WCMD
  6. Crafting By Designs – Anything Goes