Art Journal Inspiration and Valentine’s Day Cards!

Good evening friends!  Tomorrow is about “LOVE” for Valentine’s Day!  I hope that whatever you’re doing that you spend it with those that you love or at least tell someone how much they mean to you!  I have a special post this evening that is dedicated or inspired by love. ❤️

First up is my art journal page with the prompt/theme of “LIGHT/KEEPING IT LIGHT” that I’m guest hosting this month for the Art Journal Journey Challenge.   It’s been so fun to see all of the wonderful art created so far!

This page was inspired by not just the “light” prompt for the challenge, but it was also inspired by the love of my life.  We have spent many moons together and have enjoyed our time in the moonlight as we both love nature and have spent some time traveling and seeing some beautiful things.  I’m so thankful to have had these special memories with him.

For the background:  I started with a 5.5″x8.5″ watercolor with pre-punched holes at the top with my Zutter machine.  I used my watercolor to create the blue sky background with an idea of where I was going to place the moon.  I left that area to watercolor in the yellow rather than the blue.  I then used some white opaque copic watered down and splattered over top for stars.  The “moon” was die cut in white with a heart shaped die and I added a moon stencil over top to make it look like a heart shaped moon and glued it in the center of the watercolor background.

The bottom portion was made with just ripping some cardstock and ink blending one with the greens and one with greys and black.  I die cut the trees in black and glued them in place and then added the ripped layers over top.

I stamped the Lavinia Stamps “Star Gazers” stamp in black in and fussy cut it out.  I colored the rocks they were sitting on as well as their wings and popped them up on the grey ripped border.  I also hand drew more rocks around them and used a white gel pen to highlight.  I added some glitter to the wings.  Lastly, I wrote over black cardstock with a white gel pen, cut them out and attached to the ripped green border.  I then used a black pen to doodle around the words.


Next up are a few Valentine cards that I’ve made.  I’m actually really bummed because I would’ve shared another two cards that I made, but I forgot to take photos of them before I sent them out!  I used a pizza theme and they were so fun! 

This first one is for my husband and I’ve used the Craft Roulette #201 parameters to create it:

We had to make an easel card, so I decided to make a heart shaped one.  I’ve used the cute skunk from Lawn Fawn with all of the “sweets”. (which was also one of the parameters)  My husband loves his sweets!  I also had to use “quiet” colors and some sort of bokeh, so I’ve made a bokeh background and used a solid heart stamp in white over the blended colors.  It reminds me of those conversation hearts.  This skunk makes me smile!

This is another fun card that I’ve made for a friend!  I couldn’t wait to use this fun mosaic heart from Taylored Expressions.  It came as a freebie for a limited time with a Valentine release.  I like that it comes with the solid heart backer which makes putting it together easier.   I ink blended a panel in two shades of pink and then die cut the heart with the pieces.  I used the frame cut in white and then popped in the ink blended pieces inside the frame.  

The embossed heart background was made after cutting out a piece of Bubblegum cardstock with the postage rectangle die.  I stamped and die cut the sentiment over top of the heart and added some gold rhinestones. 

And this card was done for the Inky Stamper FB challenge which was to create a square card.  I have made this one 4.25″ square and used the cute Snail stamp set along with some Doodlebug papers which you can also find in their store.

I just stamped, colored and cut out the images, added a border at the bottom and cut out a scallop square in white and stenciled some clouds at the top.  More pink papers onto a white square card base and called it done!  There’s nothing better than getting snail mail!

  • I hope you’ve enjoyed my heart-filled post today and you’ve been inspired in some way!  Thanks so much for stopping in and I’ll see you again on Thursday for a new challenge to try!  Happy Valentine’s Day!

Challenges:

  1.  Art Journal Journey – LIGHT/KEEPING IT LIGHT (art journal page only)
  2. Crafty Animals – #80 Anything Goes + animal (skunk card)
  3. Critter Crazy – #83 Anything Goes + critter (snail card)
  4. Pearly Sparkles Love/Have a Heart (skunk card)
  5. Creative Knockouts – #514 Love/Valentine’s Day (skunk card)
  6. A Place to Start – Monochrome (mosaic heart card – pink)
  7. Aud Sentiments – #310 Dies/Love/Wed/Anniversary + sentiment (skunk card)
  8. Creative Inspirations – For Someone You Love/Special Friend (mosaic heart card)
  9. The Male Room – Valentine/Use a Heart (skunk card)
  10. Crafty Catz – Anything Goes optional: Valentine/Love (snail card)

Stinky Love

Hello friends!  Happy Friday and I hope that you’re having a great week so far!  I’ve been having some fun creating a couple of Valentine’s Day cards with a fun/snarky inside greeting.

So, I absolutely fell in love with these STINKIN’ CUTE skunks from Lawn Fawn!  A few weeks ago, I caught a live on FB and enjoyed the crafty products shown with these Lawn Fawn Scent with Love stamps!  I wanted to play with them and decided to order it!  I didn’t have them on hand during the video, but I decided to do my own spin from their cards once mine showed up in the mail.

I didn’t use the heart stencil they had as I decided to use my TE Heart of Hearts Layering Stencil on both of these cards.  I’ve used some clear glitter paste over the first layer without using the largest heart, let it dry and then used some red ink for the second layer.  The red strip was embossed with a 3D heart folder.  I’ve used the Lawn Fawn Scripty Love die that was ink blended faded with the red ink and layered over another die cut sentiment with glitter cardstock.  All of the images were colored with Copic markers and die cut with coordinating dies. I’ve used some black glaze and white gel pens for accents.  I just glued all of the pieces down with the exception of the skunk that was popped up with foam tape.

OK, I had shared the inside of the card that the recipient will be receiving as I thought they would get a kick out it. 😆 I’ve used the SSS Sassy Insides stamp set for the inside of both of these cards.  I finished with the Valentine sentiment and the tiny hearts from the Lawn Fawn set.

And so this is also a “spin off” from the second card they did on the live, but I decided not to add another layer to it; instead, I used the large heart within my stencil to center these darling hugging skunks.  I did about the same thing that I did on the card above with different colored inks.  The only thing popped up is the skunks over the sentiment banner that I cut out using the MFT Stamps banner dies.  I think this turned out so cute for a one layer simple card.

And then here’s what the inside of the card looks like with another sentiment from the same SSS stamp set that I’ve used on the above card! 😆  I think this one was so appropriate for using with the skunks!

So I’m thinking that these cards would be something fun for the recipients to receive in the mail.  It’s a great time of year to get something to chuckle about especially if it’s unexpected!  I hope you’ve enjoyed seeing them too!

 

Thank you so much for stopping in today!  I wish you a happy and wonderful weekend ahead!!  See you soon!

Challenges:

  1. Lawn Fawnatics – Lots of Heart
  2. Make the Cards – Valentine card
  3. Unicorn – Red (top card only)
  4. Crafty Animals – Anything Goes with animal
  5. Pearly Sparkles – Anything Goes
  6. NBUS – #35 NEW SKUNK STAMPS! YAY!
  7. Critter Crazy – Anything Goes with animal
  8. Double D – Hearts
  9. Aud Sentiments – Love Sentiment

Lawn Fawn Friday

Hello friends!  Yay, it’s Friday!  I have lots of fun Lawn Fawn “goodies” to share with you today and although it’s still a bit warm over my way, I am in the mood for Fall, how about you?  There’s nothing better in the Fall, for me, than a warm apple cider donut that we get every year from an apple orchid we like to visit each Fall!  It had me thinking of the current challenge going on…

Vicki-LF-FallTreats

It may be a bit of an oldie, but a goodie to me and I really enjoy using it!  I have pulled out my LF Love You a Latte stamp set to base my card for today.

I started with a white A2 sized top folding card base and added a piece of (now retired) “Perfectly Plaid Fall” mini paper stack that I’ve cut with the LF Stitched Rectangle die along with the pieces used on my image panel also cut with the same die set.  I layered that onto a white piece of cardstock that was cut from the LF “Scalloped Rectangle die” (Looks to be retired too!)  I have taken a strip of the plaid papers and used the LF Valentine Borders die to cut the edging on it.  I then wrapped some twine around it and added the LF Stitched Leaves that were cut from kraft cardstock and colored on the edges with distress ink and a foam blending tool.  I then tied a bow with the twine and placed it over the leaves.

I colored my images, fussy cut them out and placed them over my layered paper panels and then popped it up over the plaid card base with some craft foam.

Vicki-LF-FallTreats1

Upon a closer view of the image, you can see that I white heat embossed the sentiment from the stamp set.  I also added some glitter to the marshmallows in the cup and covered the donut with some glossy accents.  I added a LF Small Stitched Leaves that I made similar to the others to tuck inside with my treats! 🙂  All the leaves were covered with a glitter brush pen.

*Be sure to scroll down below for more Lawn Fawn goodies!!*

Here are the challenges I’d like to enter this card for:

  1.  Lawn Fawnatics – Coffee, Tea and Treats
  2. Retro Rubber (RRCB94) – Anything Goes + Older Stamp(s) Mine is circa 2015
  3. Watercooler Wednesday (WWC185) – Anything Goes
  4. Simon Says Stamp Wednesday – Anything Goes

I thought this was a good place to stick in this project I made and had entered into my local county fair last month.  This particular item did not place, but the category was “Hand Stamped Item Other Than a Card”…so I created this using a Lawn Fawn stamp:

Vicki-LFSkunk-Wood Slice

I found a bag of these really cute wood slices when I was out shopping with my mom earlier this Summer at Hobby Lobby.  They seemed like a perfect size to do this with!

I stamped this adorable skunk from the Lawn Fawn Stinkin’ Cute stamp set and then colored him in with my Prismacolor pencils.  Of course, the woodgrain gives it some slight imperfections, but I didn’t mind and thought it gave it more character!  (See the wood knot under his chin!)  I’ve added some green “Flower Soft” for the grass portion to give him something to stand on.  I also added some glitter to the hearts above his head.  Hubby drilled a hole in it for me so that I could add some twine for it to hang.

Vicki-LFSkunk-WoodSlice1

Here I’ve turned it at a bit of an angle so that you can see the thickness of the slice and the fun texture of the bark on it.  I thought this would be so cute on a gift bag or something.  I have it hanging in my room because he’s just too stinkin’ cute anyway! 🙂

Thanks for stopping in today and I wish you all a fabulous weekend!

P.S.  Sunday I will be sharing a post with a brand-new release…so be sure to check that out too!  Bye!