Stretching Out Inky Stamper Products

Hello friends! I hope that you’re having a wonderful week so far! We have experienced our very first snow accumulation this year and it was very pretty on the inside where it’s warm! LOL It wasn’t necessary to shovel as it melted when it hit the pavement/streets, which makes it nice too! I’m excited to be sharing some more Inky Stamper products with you today as I continue on with my Guest DT for this month. This time it’s all about stretching out those products you purchase to get even more out of them which I’m sure we all need during this time of the year!

Isn’t this little mouse gnome the cutest?! I don’t think I’ve seen a mouse gnome before, but this is another brand-new stamp set from Inky Stamper called Gnome, of course!

I’m not only using this same stamp set for both of my projects today, but I wanted to point out that this one above is not a card, but it’s a gift card envelope that I’ve created using the Inky Stamper Mini Envie Die. I love this die for quickly creating the perfect sized envelope to fit your gift card inside, but Chelsea also comes up with fun mini cards in a lot of her kits that work great for tucking inside this envelope too! (There’s a brand-new kit in the store that has just came out using one of the brand-new stamp sets making a mini card in her class.) I also wanted to point out that this die can be cut from one of the 6×6 Doodlebug paper packs sold in the store too!

For the front of my envelope here: I thought it would be fun to create a little scene for my mouse gnome to hang up his stockings! I took a strip from the Doodlebug Buffalo Check/Wood Grain paper pack to place along the bottom and stenciled some bricks for the background. I stamped, colored and cut out the gnome with the coordinating die and I punched a small hole on each side of him where his hands are for the string. I then took some of the “stockings” from the Picket Fence Fireplace Stockings sequins and attached them to the string that wraps around the back of the scene panel. I added a sentiment from the same stamp set, popped up the gnome and attached to a piece of green glitter cardstock and then attached it to the envelope front.

Here you can see the other side of the envelope that I’ve white heat embossed the deer from this gnome stamp set and sponged some white ink around the edges. Now to keep the envelope flap closed, you could wrap some twine or ribbon around it, but I love using the Inky Stamper Papercrafting Velcro because it’s the perfect size for this closure and it’s such a great price! You can see how easily a gift card can fit right inside too!

And here’s another scene I’ve created using this adorable Gnome stamp set, but on a regular A2 sized card this time.

So, as I was using the Inky Stamper Mini Envie Die for my gift card envelope above, I was looking at the other die pieces that come with this set and thought that the stitched triangle die would make for some great pine trees for my little mouse gnome scene. I pulled out some Doodlebug Gingham/Linen as well as the Doodlebug Swiss Dot paper packs to cut out the triangles and design my scene with the “ground” and “snowy sky” too. I placed the “sky” paper down first, added a curved “ground” and tucked in my formed triangle pines. I also tucked in the wooden sign from the stamp set and stamped the greeting over it. This gnome stamp set also has a tiny pipe that you can die cut out which is just the right size for the gnome. You can see that I’ve tucked that in behind the gnome’s hand on the right and I added some “smoke” with a marker on the background too.

I thought that the Picket Fence Woodlands sequins would be perfect with our gnome, so I’ve attached a few over the “ground” area. I also added some Picket Fence Icicles sequins to the “sky” area for the appearance of snowfall in the background. I also added another white “snowflake” to the center of my gold cord bow at the top. This is a great way to stretch your sequins by making it apart of your main scene.

For the glittery “snow”, I’ve covered the pines, sign, the gnome, the mushrooms and “ground” with some white Nuvo Crystal Drops and then covered those areas with some loose glitter while it was still wet. The reason for that is because if you just use glitter, it will dry clear, and I wanted some white to show.

I hope you’ve enjoyed my mouse gnome projects today and have been inspired to see something different with the products that you have in your stash too! Thanks so much for dropping in! Be sure to check out the Inky Stamper Store as well as LIKE the Facebook page to see a live video on Tuesday nights. There is also a fun InkyStamper Inkspiration Facebook Group to join for more inspiration and fun challenges each month too!

Challenges:

Merry Little Christmas – Anything Goes
Jingle Belles – Funny Ho, Ho (punny gnome sentiments)
Crafty Friends – Christmas
Creative Inspirations – Sparkle, Sparkle, Sparkle
Craft Rocket – Christmas/Winter
Crafty Calendar – Anything Goes
Stamping Sensations – Christmas Celebrations
We Love Stamping – Christmas
Pammie’s Inky Pinkies – Anything Goes

Inky Stamper NEW Stamps Inspiration!

Hello friends! I’m really excited to be sharing some more inspiration today as a guest designer this month using some brand-new Inky Stamper stamp sets that were just released! Stop by the store and check them out…they’re so cute!

First, I have a couple of shaped interactive cards for those warm drinks as the temperatures start to cool down. I made one for Autumn and shared it in the Inky Stamper FB Group and was asked how it I made it, so I thought I’d share that one along with another Christmas style version that I made too:

Aren’t these so cute with that little raccoon from the Inky Stamper Warm Beverages stamp set?! The one on the right is the one I made with Fall colors covering the front of the cup with the Doodlebug Gingham/Linen paper pad. I also used the Doodlebug Bon Bon Twine around the cup sleeve.

The cup on the left is more Christmas themed and I’ve used pretty much the same products, but just changed up the colors a little bit. This cup is slightly different because it’s about 1/4″ shorter so that it would properly fit inside an A2 envelope. The Autumn card was a bit snug, so I tweaked the size a bit more on the Christmas to make it fit nicely.

When you pull the lid off the top of the coffee cup, there is an insert with a greeting and/or a place where you can add a gift certificate. These were so fun to create and easy to do! Mass production could be possible for sure!

All that is needed are some measurements and a few tips along the way to get you started. I thought it would be easier to understand with a video, so check that out below or watch on You Tube HERE.

I also had a birthday card that I needed to make for someone, so I thought I’d pull out the new Inky Stamper Hippo stamp set and have some fun with it!

Aren’t these party animals so cute?! I thought this one would be fun to turn into a polaroid style, so I pulled out a square die to create my own polaroid frame with it! I also cut another one in black cardstock so that I had a bit of dimension with it. I stamped the sentiment from the set at the bottom of the frame.

The background behind the Hippo was created by white heat embossing the music note image from the stamp set over some Inky Stamper Watercolor Panels and then using some watercolors for an emboss resist background. I colored up the Hippo, bird and party hat and cut them out to arrange over the background. I added a couple of pieces of the Doodlebug Grey Swiss Dot Washi Tape over top of the Doodlebug Gingham/Linen Paper that was cut out with a wonky stitched die and attached to a white top folding A2 card base. I found a couple of sequins from the Picket Fence Rubber Duckies mix and then filling the centers of them with yellow Stickles.

So many different things going on in this post, but I hope that you’ve enjoyed it and have been inspired to create something too! Thank you so much for stopping in today!

Challenges:

Love to Scrap – Anything Goes
Love to Craft – Anything Goes
Krafty Chicks – Stamp Act
My Time to Craft – Critters
Colour Crazy Craft – Anything Goes + coloring
Lil Patch of Crafty Friends – Anything Goes
Pammie’s Inky Pinkies – Anything Goes
The Corrosive – Anything Goes

Magnificent Scene, Birthday Crap and Craft Storage

Hello friends! Welcome to September! Really hope that you’ve had a wonderful Labor Day weekend and have had a great start to the month so far! I’m still trying to get my MOJO in gear as I really love this time of the year with all of the wonderful Autumn things happening both outside AND in the crafty world too! Really love when it starts up, but as it gets closer to the end of the year…I’m ready to skip right over it! LOL!

Today I have a fun post to share with some projects I made with several Inky Stamper products! They have a FB challenge to participate in every month and so I thought I’d share what I came up with. (Check it out and play along if you have any Inky Stamper stamps!) *Check out the store as well because there is a brand-new release that just came out!

This was a fun little scene to create on a mini slimline card! So, the Inky Stamper Inkspiration FB Group challenge THIS month (Sept) is to use more than just one Inky Stamper stamp set on one design. I really liked this challenge because it got me thinking of what to use and pull out several different images and actually use them! Looking forward to seeing what other people come up with too! So, for my scene, I’ve actually pulled out EIGHT different stamp sets!!!😮

To start with the background, I pulled out the *Housefly set with the squares image to clear heat emboss the background and then ink blend over top for an “emboss resist” technique. I took the *Rainy Day set and stamped the rainbow/cloud image and fussy cut the clouds to add on the background sky. For the “flying birds” and the “pattern” at the bottom over the green strip, I’ve used the *Pelican set. Of course, the main characters are different sets from *Rosie Solo and *Ralph Solo. For Rosie’s “hair”, I stamped the butterfly from the *Bug Catcher set to color and fussy cut it out which was then popped up over the flower she originally has. I also used this same set to white heat emboss the sentiment. For Ralph, I pulled out the *Snail set to stamp and color a heart which he is holding. I just made a slit around Ralph’s “hand” to help him hold the heart. And lastly, I pulled out the *Bee set to stamp, color and fussy cut the flower image. I cut off the stem and just attached the flowers with one of them popped up with foam tape. Lastly, I’ve added some sparkle to the butterfly on Rosie and the heart with Ralph using my glitter brush pen. I then added some sequins from the Fall Flowers sequins mix and filled the centers with some Stickles.

So, did I, do it? Did you count out the eight different sets? I think this mouse couple is too cute…and no… they aren’t the “real” mice, these are the good ones to have! 😁

Ralph is showing up again! I needed to make a humorous birthday card for my son and I’m sure he’ll get a kick out it! 😂 This is actually the first card I made for this month’s Inky Stamper Inkspiration FB Group challenge, but I didn’t use eight different sets like I did on the one above, I only used four different sets. However, I used REAL TP!

The background was created using some of the Doodlebug Gingham/Linen paper which the “bricks” image was stamped over with grey ink from the *Goat set. I also used this same set to stamp the “grass” border towards the bottom with another strip of green from the same Doodlebug paper pack. I just fussy cut the top of the grass strip to attach over the grey brick background. Of course, the Ralph inside the TP roll came from the *TP set along with the “pile of poo”💩 and the “Oh Crap!!!” sentiment that was white heat embossed over a black banner and popped up with foam tape. The balloon image came from the *Bunny set. I decided to attach a piece of the white Doodlebug twine and pop up the balloon with foam tape. I attached the other end to Ralph’s “hand”. Lastly, the fourth set I used was the sentiment at the bottom from the *Iguana set. (For that sentiment, I only used a portion of it from the stamp.) So that makes FOUR sets used!

The images on this card were colored using my CC Real Brush markers, I stamped the Ralph image again over the TP… yep, stamped directly onto the TP and fussy cut it out to paper piece over the image. Gives it the REAL look and feel of TP! 😉 I have die cut a black scallop frame to go around the scene and lastly, I’ve added some sparkle to the balloon and the tiny flies around the “poo” with a glitter brush pen. I didn’t want to add too much as this is a masculine style birthday card.

And then I have one last project to share that I actually made for last month’s challenge that I “squeaked” in just in time too! (See what I did there?!😂) Ralph is just so popular today! I had a plastic bag sitting around on my table that I kept moving out of my way and it was frustrating me, so I made this “container” to hold some crafty things to sit on my table! It’s actually a REALLY old tutorial from Splitcoast Stampers using chipboard coasters! I have SO MANY of those coasters and I was happy to use some up. CHECK OUT THE TUTORIAL HERE (P.S. The tutorial is actually done up by Taylor from Taylored Expressions, before her store years! That’s how old it is!)

The challenge last month was to use primary colors on your project which are the red, blue and yellow colors. Not realizing what the challenge would be for THIS month, it would actually fit in with that too! I used THREE different sets for this project. Again, I’ve used the *Ralph Solo set that was colored up and fussy cut out as this was done before the new die came out for him! (see top card) I took out several of the different Doodlebug papers to cover my chipboard coaster panels being mindful of the Primary Color challenge. Rather than leave the papers as is, I decided to pull out the *Inky Greetings set to stamp the splatter image in the coordinating colors with the papers. I also decided Ralph needed to be holding a pencil, so I pulled out the *Owl set and stamped, colored and fussy cut the pencil image which was added to Ralph’s “hand” by making a small slit for him to hold it.

I was happy to pull out some of my old punches to create the backdrop for “pencil holding Ralph” as well as using up those old coasters and some more papers and ribbon from my stash! (I’m really hoping to be doing more of this often!)

I know this was a long-worded post, but hope you enjoyed the projects and got some smiles too! Thanks for catching up with me today! See you soon!

Challenges:

Crafty Animals – Anything Goes + animal
QKR Stampede – Anything Goes
Love to Scrap – Anything Goes
Happy Little Stampers Birthday – Anything Goes Birthday (2nd card)
Sisterhood of Snarky Stampers – ‘B’ is for Birthday
We Love Stamping – Anything Goes with stamping (all are stamped!)
Crafting Happiness – NOT A CARD: Anything Goes (3rd project)
The Corrosive – Anything Goes
Try It On Tuesdays – Animals -real or imagined

An Electric Connection and Happy Mail Love For Valentine’s Day!

Happy Valentine’s Day friends! Today is the day all about hearts and love! Although I’ve already sent out my Valentine cards, I have a couple of lovely individuals who take a peek at my blog from time to time…so I have to wait until they’ve received their cards before I share them here!😉 It’s somewhat hard to “hide” my crafting since hubby’s now retired! LOL So here’s the cards I made:

I just KNEW the minute I saw this Taylored Expressions Love Lights Stamps & Stencil Combo set that it was something perfect for making cards for my retired electrician hubby! This set also coordinates with other products and so I started by foiling the TE Foil It-Love Lights panel and then ink blending with the stencil set. I had to use blue as this is hubby’s favorite color. So, I’ve used the TE Sprinkles and Potato Chip inks. The cardstock is TE Sprinkles. (I used softer tones for the Valentine feel.) I also used the coordinating TE Mini Strips-Watt’s Up sentiment set that was silver heat embossed over the TE Sprinkles cardstock and cut out with the TE Mini Strips-Asymmetrical Die. I just love the punny sentiments that go with this set!

The tiny light bulb for the accent I used actually came from a TE ‘freebie’ with one of my orders, so I die cut the light bulb with white glitter cardstock and lightly sponged some yellow ink in the center. I die cut the center and bottom of the bulb with silver brushed cardstock and glued it onto the light bulb. I die cut a circle from some vellum and also sponged this with yellow ink and glued the light bulb on top of it and attached it to the side of the card nestled with the sentiment strips that were popped up with foam tape. He will have gotten this one this morning.

And here’s another card that I sent to someone very special! It’s a simple card, but wow it was so much fun to create with using the Simon Says Stamp Limited Edition Happy Mail Love card kit! (Looks like it’s still available at the time I’m writing up this post, but not sure how long it will stay available.) I so love those CUTE Doodlebug products and there are so many of them including the stamp set that goes together in this kit! I wanted to play some more with it, but I have so many other things to focus on, so I’ll have to come back to it later! LOL

I’ve used the Doodlebug background papers from the kit and cut it out with a Lawn Fawn Cross-Stitch die and also cut a strip of ‘grass’ with green cardstock at the bottom using the Lawn Fawn Grassy Border die. The heart papers were attached over a red piece of cardstock from the kit and layered onto a top folding A2 white card base. The grass border was attached over the red cardstock and heart background papers. This gave me the room to take the CUTE Doodlebug LOTS OF LOVE Odds and Ends Ephemera die cut shapes to create my scene with! This pack came in the kit and there are SO many pieces! I’m sure you could go on and on making cards! The bird and bunny die cuts were popped up with foam tape. It’s hard to see in the photo, but I’ve taken my glitter brush pen to all of the hearts on the images and the cheeks on the cloud.

I think these cards did what was intended which was to create smiles during this cold winter season! I sure hope that it has done the same for you as well! 😉 Wishing you a happy Valentine’s Day with all of my heart! ❤ Thanks for stopping in and I’ll be seeing you soon!

Challenges:

Moving Along With the Times – Love/Anniversary/Wedding
Creative Inspirations – With Love
The Paper Funday – Anything Goes optional ‘Hugs & Kisses’
613 Avenue Create – Anything Goes optional ‘Whimsical Valentine’
Everybody Art – Love and/or Heart
Try It On Tuesday – ‘All Loved Up’
Cardz 4 Guys – ‘Love’ cards
Little Red Wagon – Be My Love/Valentines

Huge thank you to those that keep the challenge blogs going!

What’s Up With Washi and Camping Fun!

Hello friends! Hope you’re having a great week so far! Today, I have some cards I made for my GDT month at Inky Stamper using washi tape! I have loads of washi tape because I have a “squirrel moment” when I see it and think how pretty…and it’s not that expensive and easy to craft with and whatever excuse I can come up with!😁 Then it sits around unused!

This is why I’m glad that the “Washi Tape Challenge” came up for this month in the InkyStamper Inkspiration FB Group! You just need to use at least 1 Inky Stamper product and your washi tape…any you have! I decided to go for 2 cards:

For both I cards, I took a scrap piece about 4.25″ x 5.5″ of black cardstock and covered it diagonally with 3 different types of washi tape. One was from the Inky Stamper Doodlebug Lily White Swiss Dot washi tape, another from some metallic shiny silver washi tape and another from some clear sparkly washi tape in my stash. The white turned up almost grayish over the black and the clear sparkle turned up differently as compared to it on the crab card in the background over white cardstock. I thought it was cool the different looks I got with it.

I then decided to use some dies to cut it out with and then cut the remainder in different sized strips for my cards as well so I wouldn’t have to waste the rest of it…

Vicki-InkyStamperGDT-Washi Challenge-cat

For this card, I took a “hello” die from my stash and cut it out of the washi tape piece I created on the black cardstock piece. I then cut out the “negative” sentiment with a rounded corners rectangle die and layered another piece of black cardstock behind it that was cut out slightly larger and popped up over an A2 card base that I’ve also layered with more of the washi tape strips I cut out from the left over. I added this cute kitty from the Inky Stamper Cat stamp set along with the sentiment at the bottom. I thought it would be fun to add a couple of paw prints at the bottom in white ink from the Inky Stamper Dog stamp set. Lastly, I thought it needed some Doodlebug Twine too!

Vicki-InkyStamperGDT-WashiChallenge-crab

And for this card, you see that I’ve taken the die cut “hello” sentiment from above and added it to the crab’s claws to hold up in the air…so fun! I still had a couple more left-over strips from above and added that to the top and bottom of the scene I’ve created on this card.

So, for the scene, I’ve used the cute Inky Stamper Crab stamp set along with the sentiment at the bottom. The sparkly looking “sea” in the background comes from a couple of different glitter washi tapes I had in my stash. I then used a border die cut to cut it out to go across the card front. Die cut some waves for the sand and tucked in all of the stamped and colored elements over a stenciled cloud background. I added this card front scene to an A2 sized black card base.

How about you?! Do you hoard your washi tapes? I sure had fun playing around with it making these cards and I think it’ll be fun to sit and play some more with it as I have so much of it! I think it was fun to die cut too!

Just wanted to share some projects with you I’ve made this past weekend from a Craft Camp that I went to with Inky Stamper. We made lots of fun projects: (click on photos to enlarge!)

First photo shows a fun keychain made with a special knot technique that was new to me! The flamingo accent is from a shrinky Dink! The wood slice is stamped and sponged with ink. I put a magnet on the back of mine. The second set of cards was made from a stamp set received in the camp kit from Anthony’s Paper Craft (new to me store) and the last set of cards is a brand new Inky Stamper Flamingo stamp set with an interactive card and mini card! Had lots of fun!

Thanks so much for stopping by today! Really hope you’ve enjoyed my washi tape cards and you can come join in the challenge with us this month! Have an amazing crafty day!

Challenges:

Aud Sentiments – Anything Goes + sentiment
Allsorts – Add some sparkle
Sweet Stampin’ – Feature an animal
Lil Patch of Crafty Friends – Anything Goes
Crafty Sentiments – Anything goes

August GDT for Inky Stamper!

Hello friends! Wanted to thank you for your kind comments! Like I previously mentioned in my last post, I’ve still been crafting and following on FB by joining some classes, challenges, etc. So, although I haven’t been active on my blog, I’ve been crafting and sharing over there once in a while. Just having some fun while using more of my crafty stash is all! However, while playing around on FB, this happened:

A couple of weeks ago I was invited to join as a guest designer for Inky Stamper this month! Yay! If you haven’t heard of this company, check out the stamps…they’re too cute and the owner, Chelsea, is so fun too! She has such an infectious excitement about her that you can see if you happen to catch her on one of her weekly FB lives every Tuesday at 7:30 pm CST. (On the Company FB Page)

So, I will be sharing my creations using Inky Stamper products every Wednesday this month and I hope that I will be able to INKspire you with something fun! I’m starting this Wednesday with some products that just recently released:

The first thing that Summer reminds me of is flip flops! There is a cute little image of flip flops in this Splash stamp set which inspired me to create this shaped card and birthday tag! That’s also where that cute little mouse you see is from as well! But the sun and chair come from the Chaise Lounge stamp set, which I’ve combined both sets to use on my creations here. I think these two sets go hand in hand with each other and it’s probably best to just get them both! If you choose to get the dies with these sets, it cuts out the mouse and frog separately from the floaties they’re already on so you can pop them up! So, they work on the floaties as well as the chairs. So cute!

For my flip flop card, I’ve taken a very old template that I had found in my stash while cleaning up my craft room and thought this would be perfect to make a shaped card with! I started by tracing the pattern for the base of my card and cutting two shapes so that I can make a card that opens from the side as you see in the photo. The card measures approx. 7″ x 3.5″. It’s a bit taller than a mini slimline card, but I can easily make my own custom envelopes with my envelope punch board. This is another fabulous way to use up those hoarded papers too!

I took the smaller template and used the fun Doodlebug Floral & Graph paper pad (Available in the Inky Stamper store too!) to cut the inner flip flop pattern with. (I had to angle the template to make it fit onto the 6×6 sized paper.) I added a couple of flowers from my stash along with the matching ribbon for the flip flop straps before attaching to the card base. Colored the images, cut them out and added the sentiment strip at the bottom and cut it to measure with the inner flip flop edge. I added some texture by sanding the edges of the paper too.

Here’s a little tip if you’re cutting out the stamped mouse image from the floatie: When you use the die to cut it out, the edges around it will have some stamped lines on it where the white border is. All I did was take a white gel pen to cover up those lines to that it looks like a perfect white line around the image! P.S. This is also a great way to cover any coloring mistakes made! 😉 This also works for fussy cutting an image as well!

I popped up “Rosie” (the mouse), as she is called, with foam tape over the chair. I’ve also added some Doodlebug gems to the center of the flower on Rosie and for the flower at the top of the flip flop card.

I thought this would be a nice summer birthday card so I wanted to make a matching tag to go with it. I’ve pulled out the Inky Stamper Mini Envie Die and used it for this tag design. Again, I pulled out the Doodlebug Floral & Graph paper pad and used this die to cut my tag with making sure that the center of the envelope die would be cut out. This is what I’ve used for the base of my tag. I like using these papers because they’re double sided. That way the back still has a nice color/pattern to it too.

I used this particular die for my tag because of the size. Putting another strip of paper on the back side of this tag will create a pocket for you to tuck a gift card inside if you want to use it for that! See below:

Vicki-InkyStamperGDT-flipflop-tagbackpocket

Since there are score marks to make the envelope, I ignored those lines and used my paper trimmer to cut out the center which is where the orange base of my tag came from. I cut off the top two corners diagonally and punched a hole at the top which created my tag. I also die cut the envelope tag again with the Doodlebug Swiss Dot Paper Pad this time being sure that I had a good portion of the scallop edging cut from it. I used that piece for a design element on the tag.

I stamped the sentiment and flip flops from the Splash stamp set as well as the sun from the Chaise Lounge stamp set, colored them, fussy cut/die cut them out to add to the tag. I used a black pen for stitch lines along the edges. I added my own hole reinforcer circle punched out and then added some Doodlebug Bumblebee Twine to the top. Finished it off with a couple of clear sequins from the Fishy Wishes sequins mix and filled the centers with Nuvo Glitter drops. I also covered the sun with a Sparkle Glitter Pen.

I hope that I’ve INKspired you today with my summer flip flop theme! Thanks so much for dropping in here. If you’d like to see more from this company, be sure to join the Inkystamper Inkspiration FB group! Hope to see you there! Have a great day!

Challenges I’d like to enter:

Just Us Girls – Anything but a card (tag only)
Daring Cardmakers – Gift Tags Galore (tag only)
Moving Along With the Times – Summer Fun and/or Colors (orange/yellow)
NBUS #29 – Aug “Never Before Used Schtuff” (never used new stamps!)
Aud Sentiments – Anything Goes + sentiment
Sparkles Monthly – Outdoor Fun
2 Crafty Critter Crazies – ATG + critter

Holiday Sweets for {Cupcake Inspirations}!🥧

Hello friends! Hope that you’ve enjoyed your weekend! Thanksgiving is coming up this week and the full Holiday Season has begun and one of the things that most people are thinking about (at least my family anyway!) are those wonderful “Holiday Sweets“! Yum!😋

This is also our new challenge for the next 2 weeks over at {Cupcake Inspirations}! So I hope that you are able to start (if you haven’t already) thinking about creating something crafty with those “Holiday Sweets” in mind and join along in the fun with us! Here’s what I’ve come up with for this challenge:

I remember times with my kids when we did the “milk and cookies” you leave for Santa along with your nice letter about some things you wish for him to bring you. We always wrote the letters to Santa and made sure that we put out the cookies…and usually hot cocoa on Christmas Eve. There were always candy canes on the tree to pluck off to stir your hot cocoa with as well!

I remembered this fun little Simon Says Stamp Christmas card kit (Christmas Squad) that I hardly made a dent in to use at all, so it was really great to pull out these adorable Doodlebug items with a “milk and cookies” theme in the papers and images! I had unopened packages of cut out images which is the table with the lamp, Santa letter and mug on it. I took the doggie image from the stamp set, stamped, colored and used the coordinating dies to cut it out with and popped it over the table image panel with foam tape. This panel was cut with a Wonky Stitch Rectangle die as well as the background papers. I layered everything over an A2 sized top folding red card base. The image panel was also layered over some of this red cardstock as well after sponging around the edges with some light blue ink.

Lastly, I took a sentiment from the same stamp set and white heat embossed it over another piece of red cardstock that was cut out with a banner die and popped up underneath the image panel with foam tape. (I thought it was the perfect sentiment to add especially for this year to someone you miss!)

Here’s a closer view of the images that I’ve put together onto this panel. The pup was colored with my usual Copic markers and I’ve used a silver gel pen to color in his collar tag with.

I also had some Doodlebug stickers with the kit and added the bitten cookie with a smile face next to the other cookie on the table. I also added a candy cane enamel sticker to the table as well as the heart enamel stickers above the table.

The strip of papers in the center of the card came from the backside left over piece that was cut out from the milk and cookies panel in the background. The colors matched up nicely with the images.

I hope you’ve enjoyed my “Holiday Sweets” card today and it has brought you a smile, a special memory or inspiration. If you need more inspiration for this challenge, please be sure to check out the {Cupcake Inspirations} Challenge Blog to see the rest of the DT sweeties and what they came up with! Can’t wait to see what you come up with!

Thanks for stopping in and I’ll be seeing you soon!

WISHING YOU ALL A VERY HAPPY, HEALTHY AND BLESSED THANKSGIVING

Challenges:

Simons Says Stamp Wednesday – Christmas
CRAFT – Christmas
Cardz 4 Galz – Cute Christmas
Cute Card Thursday – Sentimental
Crafty Catz – Anything Goes optional Christmas

Food and Drink at Cute Card Thursday!

Hello friends! It’s time for a new Cute Card Thursday challenge! This one may have a tendency to make you a little hungry as we are asking for your “Food and/or Drink” creations to add to the challenge gallery this week! We really look forward to seeing what you come up with for it!

Here’s my take on the challenge:

Vicki-CCT552-NachoBday

LOL! I can’t help but giggle at these silly puns and especially with the smiling faces on the food images too! 🙂 I just had to grab the Simon Says Stamp “I Chews You” card kit and I couldn’t wait to have a play with it! Everything that I’ve used on my card including the paper all come from this card kit.

There were some pre-scored card bases, so I used one of those for my card base, then I took a strip of the colored stripes paper and a thin strip of the gold glitter paper included in the kit and glued it on at the bottom with the glue included in the kit.

I then stamped the images and colored them with my Copic markers. I put the “salsa bowl” at the bottom so it looks like it’s setting on top of the colored stripes. I added the speech bubble with the punny sentiment inside of it too. I then added the sequins from the kit and then filled the centers with some Nuvo Crystal Drops for the centers.

Vicki-CCT552-NachoBday1

Here you can see a closer look at the coloring of the images. I’ve also added some shimmer with a Spectrum Noir Clear Glitter Brush Pen over the “salsa” images. I know that it shows it as “guacamole”, but I’m more of a “salsa” person myself and decided to go for that instead. Hubby is not a guac fan either, but we love to eat Mexican food! 🙂

Thanks for joining me today!. What’s on your menu?!

Challenges: